Years ago, in addition to guitar amplifier parts Studio Sound Electronics also stocked the following consumer electronics parts (from 1997 until 2017):

• VCR Parts and Belts

• Cassette Deck Belts

• Cassette Motors

• CD Player Laser Pickups and Belts

• Turntable Needles, Cartridges and Belts

Today, we no longer carry the above items, except for a few closeout exceptions (see below).  
Also see below for alternate sources for these parts.
 

By 2017, it became apparent that demand for these products had fallen significantly.  In addition, availability of these parts from manufacturers had also declined.   So, in April 2017 we discontinued carrying belts and parts for consumer audio and video products.   We continue to provide a variety of parts for guitar amplifiers and effects pedals.

Today, you can continue to find some parts for cassette decks, turntables, CD players and VCRs from the following sources:

KP Components:  https://kpcomponents.co/          Consolidated Electronics:  https://ceitron.com/sales/index.php         

Ness Electronics:   https://www.nesselectronics.com/collections/belts?          Turntable Needles & Belts:   https://www.turntableneedles.com/

Vintage Electronics:   https://www.vintage-electronics.net/

STK5371 VOLTAGE REGULATOR, FOR VCRs

Part #STK5371

STK5461 VOLTAGE REGULATOR, FOR VCRs

Voltage Regulator IC 
• Equivalent to NTE7027

Part #STK5461

STK5468 VOLTAGE REGULATOR, FOR VIDEO RECORDERS

Input: 30 Volts DC
Output 1: 12.8 Volts DC 1.0 Ampere
Output 2: 12.1 Volts DC 1.0 Ampere
Output 3: 5.3 Volts DC 1.0 Ampere

Part #STK5468

STK5471 VOLTAGE REGULATOR, FOR VCRS

Part #STK5471

STK401-140 STEREO POWER AMPLIFIER MODULE

• AF Power Amplifier Circuit
• Sanyo 4093035000 IC, 
• Harmon Kardon HC10357030  IC,
• Marantz HC10357030 IC

Part #STK401-140

MCM AUDIO/VIDEO TAPE SPLICING KIT

The most frustrating thing about splicing tape is holding it in position.   This jig fixes that problem!    Designed for both 1/2" video tape and 1/4" cassette tape.   Includes splicing tape and additional leader tape for VHS and Beta cartridges.    Note:   Razor blade is not included for safety reasons - supply your own single-edge razor blade.

Part #TAPE-SPLICE-KIT

1/2" diameter cassette pinch roller.   Used in many cassette decks by various manufacturers.  Complete dimensions:   1/2 inch (12.9mm) diameter X 8.3mm width.   Hole is 2.1mm in diameter.

Part #CPR-5

KSS-213C CD OPTICAL PICKUP

The KSS-213C pickup has a 3.86mm focus length, 0.45 NA, 2.1mm working distance, 760-800nm laser, 200mA RMS focusing coil, and 2V laser diode reverse voltage.

Click here for a partial list of CD makes and models which use this optical pickup.

This CD pickup is currently selling on Amazon for $34.50.

Part #KSS-213C

6 FT COAX CABLE, RCA PLUG AT ONE END, BNC AT THE OTHER END.   RG59U CABLE.

Used for video connections to some commercial quality VCRs and televisions.  6 ft in length.

Part #RCABNC-6

6 FT HDMI CABLE FOR CONNECTION TO MODERN HIGH-DEFINITION TELEVISIONS

An HDMI cable connects a source device to a display device, transmitting high-definition digital video and audio signals through a single cable. This allows you to connect devices like gaming consoles, Blu-ray players, and laptops to televisions, projectors, or monitors.  Gold ends, 6 ft in length.

Part #SCBL-00002-00

Plug is a polarized NEMA 1-15P.   Connector to the equipment is an IEC 320-C8.

Part #23-195

Plug is a non-polarized NEMA 1-15P.   Connector to the equipment is an IEC 320-C7.

Part #23-190

A-7040-474-C GEAR SET, FOR CERTAIN SONY VCRs

Used in some Sony SLV series VCRs.    Kit contains 3 gears and one slide plate.  Common failure item.

Part #A-7040-474-C

STUDIO SOUND ELECTRONICS VMK-F7442 VCR BELTS & IDLER TUNE-UP KIT

Used in some late 1990s VCR models sold under the brand names of Funai, Crosley, Sears, Sylvania, Magnavox, Hitachi, and Symphonic.  Check specific VCR for a match of the idler to determine if this is the correct kit.   Click on photo to the left for a close-up.

Part #VMK-F7442

HITACHI 6823665 CARRIAGE LOADING ARM

Used in models of Hitachi and RCA VCRs during the 1990s. Click on photo to the left for a close-up.   Also replaces RCA part number 213967, Hitachi part numbers 6823661, 6823662, 6823663 and 6823664.   Used in Hitachi Models VTF365AW, VTF380A, VTF381A, VTF382A, VTF390A, VTF391A, VTF392A, VTF462A, VTF482A, VTF494A, VTF631A, VTM170A, VTM171A, VTM181A, VTM261AW, VTF265A, VTF270A, VTF281A, VTF284A, VTUX605A and RCA Model VR621HF

Part #6823665

Used in a number of RCA, GE, and Panasonic VCRs from the 1990s    Inset picture shows the bottom of the VCR chassis which used this slide plate.   See VCR models which use this part here

Part #VMMS0105

SHARP NPLYV0107GEZZ IDLER / CLUTCH ASSEMBLY
ALSO REPLACES NPLYV0111GEZZ

Replaces the idler assembly in many Sharp VCRs from the 1980s.

Part #NPLYV0107GEZZ