Audio Cassette Motors

Universal Single Speed Motors (for Single Deck Machines) These motors work in most single-speed decks.   Match voltage and direction of rotation with your existing motor. $10.95 each

(*Direction refers to the direction of rotation of the shaft, when facing the motor at the shaft end. CW means clockwise, and CCW means counterclockwise.  All of these motors are 2400 RPM.)

Model	Voltage	Direction*	Order
EG530AD-6F $10.95	6 volts	CW*
EG530AD-6B $10.95	6 volts	CCW*
EG530AD-9F $10.95	9 volts	CW*
EG530AD-9B $10.95	9 volts	CCW*
EG530AD-2F $10.95	12 volts	CW*
EG530AD-2B $10.95	12 volts	CCW*	DISCONTINUED - NO LONGER AVAILABLE

 

Dual Speed Motors (for Dual Deck Machines) NOTE:  Unlike the single speed motors, these motors are NOT universal.   Your existing motor needs to have the identical part number as shown below, or it is very likely that the replacement motor will not work correctly. $12.95 each

(*Direction refers to the direction of rotation of the shaft, when facing the motor at the shaft end.
CW means clockwise, and CCW means counterclockwise.)

Model	Specs	Price	Order
EG530YD-2B	12V CCW, 2000/4000 RPM	$12.95
EG530KD-2B	12V CCW, 1600/3200 RPM	$12.95
EG530KD-2F	12V CW, 1600/3200 RPM	$12.95
EG530KD-9B	9V CCW, 1600/3200 RPM	$12.95
EG530KD-9F	9V CW, 1600/3200 RPM	$12.95
EG530YD-9BH	9V CCW, 2000/4000 RPM	$12.95

Recording heads, capstans, and metallic guides can become magnetized from repeated use.   The resulting magnetic field on these parts results in a very slight erasure of a tape each time you play it.  Over time, this degrades the quality of the video and audio. The HD-880 demagnetizer will remove this magnetism.   Instructions included.   (Note:  Do not use around video or audio tapes - the demagnetizer can partially erase recorded tapes when it is plugged in.)

HD-880 Demagnetizer
$14.95

Belt Installation Tool

This is a real time-saver! Polished metal, tapered design to fit comfortably in your hand.  Takes the frustration out of installing belts in tight places.  One end designed for pulling, the other end for pushing.  Worth its weight in gold! 8 inches long.

Part number BST-1
$5.95 each

Superior to isopropyl alcohol, this specially designed head cleaner is formulated from Freon-TF.  Faster evaporating, better suited to trapping and removing residue.   For Video and Audio Heads.  2 fluid ounces. 
Cannot be shipped via Priority Mail, or shipped outside the USA. 

 
CB-402              $8.95

Cassette Pinch Roller

Size is 9mm outer diameter, 6mm width, and the hole diameter is 1.55mm.   Generally used on smaller cassette players, newer units, walkmans.  Too small for most traditional bookshelf cassette decks.   Measure your old roller carefully.
CPR-9 Pinch Roller
$3.85

Cassette Deck Pinch Roller

Size is 12.8mm outer diameter (½"), rubber portion is 6.4mm wide (¼"), total width is 8mm, and the hole diameter is 2.6mm.   The most common size found in traditional bookshelf type cassette decks, although it won't work in every deck.  Measure your old roller carefully.
CPR-5 Pinch Roller
$3.85

You may be wondering how to measure the sizes of your existing belts.  Click here to find out how.