|
Photo |
Description |
Price |
Purchase |
Click on photo for
larger view |
VINTAGE
FENDER™
BLACKFACE AND SILVERFACE 2-LEG WRAP-AROUND CABINET CORNERS WITH LIP.
BRIGHT NICKEL-PLATED STEEL.
Important Note: NOT
for the Blackface or Silverface REISSUES. BEST fit for
Fender™ vintage combo amps. While these corners will
work on Fender™ vintage speaker cabinets or heads, such as Bassman, Bandmaster, Showman,
Tremolux, etc, the screw holes may not align perfectly with the original
holes. In the 1960s and 1970s, Fender used a slightly different
size corner on heads/cabinets than was used on combo amps.
Vintage style Fender™ corners with
counter-sunk screw holes. For 1/2" radius corners. Set of
4, includes oval-head tapered stainless screws.
Part #FVC-2L
|
$7.95
(Set of 4 corners with screws) |
|
Click on photo for
larger view |
VINTAGE
FENDER™
BLACKFACE AND SILVERFACE 2-LEG WRAP-AROUND CABINET CORNERS WITH LIP.
BRIGHT NICKEL-PLATED STEEL.
Important Note: NOT
for the Blackface or Silverface REISSUES. BEST fit for
Fender™ vintage combo amps. While these corners will
work on Fender™ vintage speaker cabinets or heads, such as Bassman, Bandmaster, Showman,
Tremolux, etc, the screw holes may not align perfectly with the original
holes. In the 1960s and 1970s, Fender used a slightly different
size corner on heads/cabinets than was used on combo amps.
Vintage style Fender™ corners with
counter-sunk screw holes. For 1/2" radius corners. Set of
4, includes oval-head tapered stainless screws.
Part #FVC-2L
|
$3.99
(Set of 2 corners with screws) |
|
Click on photo for
larger view |
Vintage Fender™ and Rivera™ Style Blackface and Silverface 2-Leg Wrap-Around Cabinet Corner
with Lip - Glossy Black Steel
(Not designed for the Blackface or Silverface REISSUES. NOT for
vintage Fender™ Speaker Cabinets or Heads, such as Bassman, Bandmaster, Showman,
Tremolux, etc. These corners fit most vintage Fender combo amps.) Fit
most models of Rivera™. Vintage style Fender™ corners with
counter-sunk screw holes. For 1/2" radius corners. Set of
4, includes oval-head tapered stainless screws.
Part #FVC-2L-BLACK
|
$9.95
(Set of 4 corners with screws) |
|
Click on photo for
larger view |
Vintage Fender™ Style 3-Leg Corners with
counter-sunk screw holes, set of 2. Bright nickel-plated steel. Recreation of the vintage
style corners with
counter-sunk screw holes from the 60s and 70s.
These
corners have 3 legs (two long, one short), for 1/2" radius corners with solid
material on all three sides (no recesses). Typically used as the
rear bottom corners on the Fender Bassman Ten Combo, the Deluxe 112, etc. Set of 2, includes oval-head
tapered stainless screws.
Part #FVC-3
|
$3.99
(Set of 2 corners with screws) |
|
Click on photo for
larger view |
Vintage Fender™ Style 2-Leg and 3-Leg Corners with
counter-sunk screw holes. Bright nickel-plated steel.
Recreation of the vintage style corners with counter-sunk screw holes from
the 60s and 70s. Two FVC-2L type corners with two legs and a lip, and
two FVC-3 corners with three legs. Typically used around the bottom of the
Bassman Ten (or Bassman 10) Combo Amp from 1972 to 1982. Set of 4
corners total - two FVC-2L for the front, and two FVC-3 for the back. Includes oval-head
tapered stainless screws.
Part #FVC-23
|
$7.95
(Set of 4 corners with screws) |
|
WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.