Emerson, Orion, Broksonic, and Sansui VCR replacement parts and rubber kits.

Your VCR may have the Broksonic, Orion, or Sansui logo in place of the Emerson logo, or may be part of a TV/VCR combo unit.  The on-line database has been setup to direct you to the proper rubber replacement kit for your VCR, VCP, or TV/VCR combo unit.   Even though every precaution has been taken to assure the accuracy of the database, mistakes can be made.  If you have doubts about the pictured VCR being similar to yours please check the chassis photos below.  If you feel that we've made a mistake, please E-Mail us   and let us know.

Common replacement parts and rubber kits for these Orion/Emerson manufactured VCRs, VCPs, and TV/VCR combos.




MBK-02:
Belt Kit

Our MBK-02 kit contains all four belts that are used in these VCRs.   The belts are used to drive the clutch that drives the idler and for loading and unloading.   Common problems are no play, poor picture, or lines in the picture   Since a belt also drives the gears that move the carriage cassette load and eject problems are also common with bad belts.   Your price for our MBK-02 kit is   $5.60.


See photos for belt locations.



MBK-02P:
Complete Rubber Kit

This kit is a complete rubber replacement kit for these Emerson built VCRs.   It contains all four belts and the pinch roller.   If the pinch roller has never been replaced you really need one.   If the pinch roller has a hard glaze on it or the capstan shaft has a black build up on it the pinch roller has probably been slipping.   Your price for our MBK-02P kit is   $12.50.


See photos for parts locations.

MBK-02-MSW:

The mode switch in these Orion/Emerson built VCRs is a common source of problems.  The VCR will load the tape around the head then shut down; in some cases the VCR will activate the cassette carriage without a tape.  Both problems are commonly caused by a defective mode switch.  Soldering is required for installation.  Your price is   $6.00


See photo for location


If you need a part for your Orion/Emerson built VCR that is not listed above, use our Parts Request Form to check with us.   We will list more parts as the catalog grows.



Top view of Orion/Emerson Chassis
Our MBK-02 Series of parts are for this chassis


Bottom view of Orion/Emerson Chassis
Our MBK-02 Series of parts are for this chassis