Emerson, TMK, and Unitech VCR replacement parts and rubber kits. Your VCR may have the Unitech or TMK logo in place of the Emerson logo.  The on-line database has been setup to direct you to the proper rubber replacement kit for your VCR.  Even though every precaution has been taken to assure the accuracy of the database, mistakes can be made.  If you have doubts about the pictured VCR being similar to yours please check the chassis photos below.  If the chassis in your VCR is not like these check our MBK-05 series of kits.  Some of these models were built like these and like the MBK-05 type.  If you feel that we've made a mistake, please E-Mail us   and let us know. We have three replacement rubber kits for these Orion/Emerson manufactured VCRs. MBK-04: Contains both belts, Capstan belt, and the counter belt.   Bad belts can cause problems such as shuts down during any mode or wont get through power up initialization.   The capstan belt will also cause lines in the picture and/or audio drag.   Your price is  $2.95 See photos for location MBK-04T: This kit contains the capstan belt, counter belt and the idler tire.   The idler tire drives both reels in these VCRs.   A bad tire can cause problems such as no FF/REW, wont play, shuts down in play or FF/REW modes, or eats tape.   Your price is   $3.75 for this kit. See photos for location MBK-04PT: Contains both belts, Capstan belt, and the counter belt.   This kit also contains a replacement idler tire and pinch roller.   If the pinch roller has never been changed you probably need one.   If the roller has a hard glaze on it or the capstan shaft has a black build up the pinch roller has probably been slipping  This kit is a complete rubber replacement kit for these Orion/Emerson built VCRs.  Your price is $10.75 for this kit. See photos for location MBK-04-I: In most cases the idler does not need to be replaced, just the tire.  Occasionally the idler will lose tension and destroy tires.   If this happens the idler assembly will need to be replaced.  Your price is   $5.50 for this idler assembly. See photos for location MBK-04-MNT: Our Maintenance kit for these Emerson built VCRs contains all of the rubber parts, belts, and pinch roller as well as a new idler with tire.  This kit, along with a good tape path cleaning will bring most of these VCRs back to good working order.   The parts in this kit control just about every mechanical aspect of these VCRs.   Your price is   $15.75 for this maintenance kit. See photos for location Top view of Orion/Emerson Chassis Our MBK-04 Series of parts kits are for this chassis Bottom view of Orion/Emerson MBK-04 type Chassis Our MBK-04 Series of parts kits are for this chassis