Sanyo and Sears VCR replacement rubber kits. The on-line database has been setup to direct you to the proper rubber replacement kit for your VCR.  Even though every precaution has been taken to assure the accuracy of the database, mistakes can be made.  If you have doubts about the pictured VCR being similar to yours please check the chassis photos below.  If you feel that we've made a mistake, please E-Mail us   and let us know. We have three replacement rubber kits for these Sanyo manufactured VCRs. MBK-08: Contains all three belts, Capstan/idler belt, carriage belt and the load belt.   Bad belts in these VCRs can cause problems like, tries to power up then shuts down, lines in the picture, eats tape, and fast forward and rewind failure.   Your price is   $3.75 for this kit. See photos for belt locations MBK-08T: Contains all three belts, Capstan/Idler belt, carriage belt, and the load belt along with the idler tire.   The tire is the only part of the idler assembly that normally needs to be replaced.  The tire drives the reels in both play/record and fast forward/rewind.   A bad tire can cause the VCR to eat tape, fail in rewind or fast forward, fail to play or record.   Your price is   $4.75 for this kit. See photos for parts locations MBK-08PT: Contains all three belts, Capstan/Idler belt, carriage belt, and the load belt. This kit also contains a replacement idler tire and pinch roller. This kit is a complete rubber replacement kit for these VCRs built by Sanyo/Fisher.   If the pinch roller has never been changed in your VCR it needs one.   If the pinch roller has a hard glaze on it or the capstan shaft has a black build up, the pinch roller has probably been slipping.   Your price is   $11.25 for this kit. See photos for parts locations Top view of Sanyo/Fisher Chassis Our MBK-08 series of parts are for this chassis Bottom view of Sanyo/Fisher type Chassis Our MBK-08 series of parts are for this chassis