Sharp, KMC, and Wards, VCR replacement parts and rubber kits.

Your VCR may have the KMC or Wards logo in place of the Sharp logo.

We have three replacement rubber kits for these Sharp manufactured VCRs.

If you need a part for your Sharp built VCR that is not listed below, use our Parts Request Form to check with us.   We will list more parts as the catalog grows.

Contains all 5 belts, Capstan/idler belt, load belt, cassette belt and two counter belts.  The most common problem with bad belts is the VCR will fail when trying to go into play mode.   Bad belts can also cause the VCR to shut down while trying to power up.  Your price is  $14.95.

Contains all five belts and the idler tire. The idler tire is the only part of the idler assembly that normally needs to be replaced.   Problems with a worn or glazed tire will usually cause FF/REW problems early.   As the tire gets worse it will open cause play back problems such as lines in the picture.   Your price is $18.95.

Contains all five belts, and also contains a replacement idler tire and pinch roller. This kit is a complete rubber replacement kit for these Sharp built VCRs.   If the pinch has never been replaced you really need one.   If the capstan assembly has a black build up or the pinch roller has a hard glaze on it the roller has probably been slipping.   Your price is $27.95.