Panasonic, Curtis Mathes, Crosley, GE, Magnavox, Memorex, Optimus, Philco, Philips, Quasar, RCA, Realistic, and Sylvania VCR replacement parts kits.
Your VCR may have the Curtis Mathes, Crosley, GE, Magnavox, Memorex, Optimus, Philco, Philips, Quasar, RCA, Realistic, or Sylvania name on it instead of Panasonic.   The on-line database has been set up to direct you to the proper rubber replacement or Maintenance kit for your VCR.  Even though every precaution has been taken to assure the accuracy of the database, mistakes can be made.  If you have doubts about the pictured VCR being similar to yours please check the chassis photos below.  If you feel that we've made a mistake, please E-Mail us   and let us know.


We have two replacement rubber replacement kits as well as a maintenance kit for these VCRs, manufactured by Panasonic.



MBK-22:
Belt Kit
Our MBK-22 kit contains both belts that are used in these Panasonic VCRs.   Belts can cause a good many problems in these VCRs.   One belt drives the idler, which handles tape movement through the VCR.   The other belt drives the load assy.   Belt problems can range from lines in the picture to shuts down after power up to wont take a cassette.   Belts should be your first trouble shooting step.     Your price for our MBK-22 kit is $3.95.


See photo for location of Belts


MBK-22-MSW:
Mode Switch

The mode switch in these Panasonic VCRs is a common source of problems.  The VCR may accept a cassette and load it into the play position.   Then unload the tape and eject.   The Mode Switch can also case other problems.   Soldering is required for replacing the mode switch. Your price for our MBK-22-MSW is $9.95. 

Instructions for installation (PDF)

See photo for location of Mode Switch


MBK-22-CG:
The Carriage Gear in these VCRs is a common source or problems.  The gear that drives the carriage will strip or break teeth and cause the VCR to fail to load a cassette.  If the Carriage Drive Gear in your VCR is white, you probably need to replace it.  The replacement gear is blue and much more durable than the original white gear.  Your price for our MBK-22-CG is $3.95.


See photo for location of Carriage Gear


MBK-22-LAG:
The Load Arm Gear in these VCRs is another common source of problems.  The gear that drives the guide arms will strip or break teeth and cause the VCR to fail to load tape around the video head.  Your price for our MBK-22-LAG is $6.95.


See photo for location of Load Arm Gear


MBK-22-MSLD:
The Main Slide Plate in these VCRs is another common source of problems.  The Slider will break and cause the VCR to lock up.  You may hear a clicking or popping noise as the VCR tries to go into play or record mode.  Inspect the Slide Rod for cracks or breaks.  Your price for our MBK-22-MSLD is $5.95.

See photo for location of Slide Rod



MBK-22-LDR
The cassette carriage assembly in these VCRs is a common source of problems.   We carry a new replacement for the carriage assembly.   Your price for our MBK-22-LDR is   $26.85.


 





Top view of MBK-22 type Panasonic Chassis



Bottom view of MBK-22 type Panasonic Chassis



 
Cassette Carriage of MBK-22 type Panasonic Chassis