Panasonic, Curtis Mathis, GE, Magnavox, JC Penney, Philips, Quasar, Sylvania and Teknika VCR replacement rubber kits.
Your VCR may have the Curtis Mathis, GE, Magnavox, Sylvania, Penny, Philips, Philco, Quasar, or Teknika name on it instead of Panasonic.   The on-line database has been set up to direct you to the proper rubber replacement or Maintenance kit for your VCR.  Even though every precaution has been taken to assure the accuracy of the database, mistakes can be made.  If you have doubts about the pictured VCR being similar to yours please check the chassis photos below.  If you feel that we've made a mistake, please E-Mail us   and let us know.


We have two replacement rubber kits and a repair kit for these VCRs, manufactured by Panasonic.



VMK-177

This kit is a complete mechanical maintenance kit for the chassis in these VCRs.  It contains both belts, a new idler assembly and a new pinch roller.  This repairs the common problem areas associated with the mechanics in these models.  Your price for the VMK-177 is $15.95.


See photos for parts location
MBK-36:
Belt Kit
Contains both belts: the loading belt, and the capstan/idler belt.   Belts can cause problems ranging from poor playback to will not play at all.  If the load belt is badly worn or stretched the VCR may fail to power up, or shut down before going into play mode.   Your price for our MBK-36 kit is $2.95.


See photos for belt locations.
MBK-36P:
Complete Rubber Kit
This kit is a complete rubber replacement kit for these Panasonic VCRs.   It contains both belts and the pinch roller.   If the pinch roller has never been replaced you really need one.   If the pinch roller has a hard glaze on it or the capstan shaft has a black build up on it the pinch roller has probably been slipping.   Your price for our MBK-36P kit is $9.95.


See photos for parts locations


MBK-36-I:
Idler
This kit contains the geared idler assembly.   The most common problem with the idler is a no play or poor play situation.   These idlers do not have a high failure rate but do occasionally warp or break.  Your price for our MBK-36-I is $6.50.


See photos for Idler location




Top view of Panasonic Chassis
 
Our MBK-36 Series of parts are for this chassis


Bottom view of type Panasonic Chassis
Our MBK-36 Series of parts are for this chassis