GE, Proscan, RCA, and Toshiba VCR replacement rubber kits.
Your VCR may have the GE, Proscan, or RCA name on it instead of Toshiba. The on-line database has been set up to direct you to the proper rubber replacement or Maintenance kit for your VCR. Even though every precaution has been taken to assure the accuracy of the database, mistakes can be made. If you have doubts about the pictured VCR being similar to yours please check the chassis photos below. If you feel that we've made a mistake, please E-Mail us and let us know.
 MBK-48:Belt Kit |
Contains the only belt that is used in these VCRs. The most common symptom of a bad belt is the VCR will fail to play properly. The VCR may also fail to load tape around the video head. Your price for our MBK-48 kit is $1.25. See photos for belt locations. |
 MBK-48P:Complete Rubber Kit |
This kit is a complete rubber replacement kit for these Toshiba VCRs. It contains the belt, and the pinch roller. If the pinch roller has never been replaced you really need one. If the pinch roller has a hard glaze on it or the capstan shaft has a black build up on it the pinch roller has probably been slipping. Your price for our MBK-48P kit is $7.75. See photos for parts locations. |
 MBK-48-PR:Pinch Roller |
If the pinch roller in your VCR has never been replaced you really need one. If the pinch roller has a hard glaze on it or the capstan shaft has a black build up on it the pinch roller has probably been slipping. Your price for our MBK-48-PR is $6.50. See photos for parts locations. |
 MBK-48-CDL:Cam Drive Lever |
The Cam Drive Lever is a real common problem in these Toshiba built VCRs. The pin on it will break and the VCR will fail to load. The lever is located under the main cam gear and follows the groves on bottom of the cam. Your price for our MBK-48-CDL is $18.75. Instructions for installation (PDF)  IF YOU NEED THIS PART, VISIT PART FINDER AND INQUIRE IF WE CAN STILL SUPPLY IT. WE DID FIND ONE OR TWO EXTRA OF THESE IN OUR INVENTORY. See photos for parts locations. |
 MBK-48-CDR:Carriage Drive Gear |
The Carriage drive gear is another common source of problems in these Toshiba VCRs. The gear drives the carriage during cassette load and eject, when it breaks or chips a tooth the carriage will jamb or load erratically. Your price for our MBK-48-CDR is $3.00. See photos for parts locations. |
 MBK-48-CGRK:Carriage Repair Kit |
The arm, with plastic levers, that runs under the cassette carriage in these VCRs is another common source of problems. One or other of the plastic levers will crack or break and cause cassette load/unload problems. This kit contains the arm, with levers, and the carriage drive gear. Your price for our MBK-48-CGRK is $21.50. See photos for parts locations. |
