B-52® Pot Kits

   

Click on photo for
larger view
B-52® Model AT-100 Potentiometer Kit, 15 Single Gang Pots.  Front panel  replacement Potentiometer Kit for the B-52® Model AT-100.

Contains 15 single gang pots for the front panel.  Instructions and pot location chart included.    Note:   The trim pots for [effects send level and effects return level] and [line out level] on the rear panel are not included in this kit - only the front panel pots.

Part #BPK-1

$39.95  

Marshall® Pot Kits

   

Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 8 SINGLE GANG POTS AND 1 DUAL GANG POT.   ORIGINAL Marshall® REPLACEMENT PARTS.   JCM900 2100/2500 SERIES (NOT SL-X).
Complete replacement Potentiometer Kit for the Marshall® JCM900 amp models 2100, 2101, 2500, 2501 and 2502 with 8 pots on the front panel and 1 effects level pot on the rear panel.
NOT for the JMP combo model 2100 from the 1970s.

NOT for the 2100SL-X, 2101SL-X, 2500SL-X, 2501SL-X or 2502SL-X - see the MPK-9 Potentiometer Kit for those SL-X models
Part #MPK-1

$24.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 10 SINGLE GANG POTS AND 1 DUAL GANG POT.   ORIGINAL Marshall® REPLACEMENT PARTS.  JCM 900 4100/4500 SERIES.
Complete replacement Potentiometer Kit for the Marshall® JCM900 amp models 4100, 4101, 4102, 4500, 4501 and 4502 Dual Reverb with 10 pots on the front panel and 1 effects level pot on the rear panel.
Part #MPK-2
$29.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 13 SINGLE GANG POTS.   ORIGINAL Marshall® REPLACEMENT PARTS.  VALVESTATE 8080/8100.
Complete replacement Potentiometer Kit for the Marshall® Valvestate 80V Model 8080 combo and Valvestate 100V model 8100 head with 13 pots on the front panel.
Part #MPK-3
$31.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 13 SINGLE GANG POTS and 2 DUAL-GANG POTS.   ORIGINAL Marshall® REPLACEMENT PARTS.  VALVESTATE 8240.
Complete replacement Potentiometer Kit for the Marshall® Valvestate S80 Model 8240 combo with 15 pots on the front panel.
Part #MPK-4
$39.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 15 SINGLE GANG POTS and 2 DUAL-GANG POTS.   ORIGINAL Marshall® REPLACEMENT PARTS.  VALVESTATE 8200/8280.
Complete replacement Potentiometer Kit for the Marshall® Valvestate Bi-Chorus 200 Model 8200 head or the  Marshall® Valvestate Bi-Chorus 200 Model 8280 combo with 17 pots on the front panel.
Part #MPK-5
$44.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 8 SINGLE GANG POTS.  ORIGINAL Marshall® REPLACEMENT PARTS.  VALVESTATE 8020.
Complete replacement Potentiometer Kit for the Marshall® Valvestate 20 Model 8020 combo with 8 pots on the front panel.
Part #MPK-6
$19.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 5 SINGLE GANG POTS.  ORIGINAL Marshall® REPLACEMENT PARTS.  VALVESTATE 8010.
Complete replacement Potentiometer Kit for the Marshall® Valvestate 10 Model 8010 combo with 5 pots on the front panel.
Part #MPK-7
$12.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 10 SINGLE GANG POTS.  ORIGINAL Marshall® REPLACEMENT PARTS.   VALVESTATE 8040.
Complete replacement Potentiometer Kit for the Marshall® Valvestate 40V Model 8040 combo with 10 pots on the front panel.
Part #MPK-8
$23.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 8 SINGLE GANG POTS AND 1 DUAL GANG POT.   ORIGINAL Marshall® REPLACEMENT PARTS.   JCM900 SL-X SERIES.
Complete replacement Potentiometer Kit for the Marshall® JCM900 SL-X amp series, including the models 2100SL-X, 2101SL-X, 2500SL-X, 2501SL-X and 2502SL-X  with 8 pots on the front panel and 1 effects level pot on the rear panel.
Part #MPK-9
$24.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 17 SINGLE GANG POTS.   ORIGINAL Marshall® REPLACEMENT PARTS.  MARSHALL 30th ANNIVERSARY 6100/6101.
Complete replacement Potentiometer Kit for the Marshall® 30th Anniversary 6100 head and 6101 combo amplifiers with 17 pots on the front panel.
Part #MPK-10
$45.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 11 SINGLE GANG POTS AND 3 DUAL GANG POTS.   ORIGINAL Marshall® REPLACEMENT PARTS.  MARSHALL JTM60 AND JCM600 SERIES.
Complete replacement Potentiometer Kit for the Marshall® JTM60 and JCM600 series amps, including the JTM600 head, the JTM610 3x10 combo, the JTM612 1x12 combo, the JCM600 head, the JCM601 1x12 combo, and the JCM602 2x12 combo.  13 pots on the front panel and 1 presence pot on the rear panel.
Part #MPK-11
$40.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 8 SINGLE GANG POTS.  ORIGINAL Marshall® REPLACEMENT PARTS.  MARSHALL JTM30 SERIES.
Complete replacement Potentiometer Kit for the Marshall® JTM-30 series amps, including the JTM310 2x10 combo and the JTM312 1x12 combo. 8 pots on the front panel.
Part #MPK-12
$19.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 13 SINGLE GANG POTS AND 3 DUAL GANG POTS.  ORIGINAL Marshall® REPLACEMENT PARTS.  MARSHALL 9001 PREAMP.
Complete replacement Potentiometer Kit for the Marshall® Model 9001 rack-mount preamp.  14 pots on the front panel, and 2 effects pots on the rear panel.
Part #MPK-13
$45.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 9 SINGLE GANG POTS AND 2 DUAL GANG POTS.  ORIGINAL Marshall® REPLACEMENT PARTS.  MARSHALL 9004 PREAMP.
Complete replacement Potentiometer Kit for the Marshall® Model 9004 rack-mount preamp.  11 pots on the front panel.
Part #MPK-14
$31.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 11 POTS TOTAL.  ORIGINAL Marshall® REPLACEMENT PARTS.  MARSHALL VS65R.
Complete replacement Potentiometer Kit for the Marshall® ValveState Model VS65R.  11 pots on the front panel.
Part #MPK-15
 

$62.95

 


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 15 POTS TOTAL.  ORIGINAL Marshall® REPLACEMENT PARTS.  MARSHALL VS100 AND SIMILAR MODELS.
Complete replacement Potentiometer Kit for the Marshall® ValveState Models VS100, VS100R, VS102R, VS100H, and VS100RH.  15 pots on the front panel.
Part #MPK-16
 

$81.95

 


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 14 SINGLE GANG POTS AND 1 DUAL GANG POT.   ORIGINAL Marshall® REPLACEMENT PARTS -  MG100HDFX HEAD (NOT THE COMBO)
Complete replacement Potentiometer Kit for the Marshall® MG100HDFX head with 15 pots on the front panelThe single gang pots are available with optional dust caps* installed.   The dust caps seal out dust for reliability, longer life, and help prevent "scratchy pots" in later life.
Part #MPK-17
$39.95

Select Option:


Quantity:


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 14 SINGLE GANG POTS AND 1 DUAL GANG POT.   ORIGINAL Marshall® REPLACEMENT PARTS -  MG100DFX COMBO (NOT the MG100HDFX HEAD!)
Complete replacement Potentiometer Kit for the Marshall® MG100DFX combo with 15 pots on the front panel.  The single gang pots are available with optional dust caps installed.   The dust caps seal out dust for reliability, longer life, and help prevent "scratchy pots" in later life.
Part #MPK-18
$39.95

Select Option:


Quantity:


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 12 SINGLE GANG POTS AND 1 DUAL GANG POT.   ORIGINAL Marshall® REPLACEMENT PARTS -  MG250DFX COMBO.
Complete replacement Potentiometer Kit for the Marshall® MG250DFX combo with 13 pots on the front panel.  The single gang pots are available with optional dust caps installed.   The dust caps seal out dust for reliability, longer life, and help prevent "scratchy pots" in later life.
Part #MPK-19
$36.95

Select Option:


Quantity:


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 17 POTS TOTAL.  ORIGINAL Marshall® REPLACEMENT PARTS.  Marshall® MODEL VS265.
Complete replacement Potentiometer Kit for the Marshall® ValveState Model VS265.  17 pots on the front panel.
Part #MPK-20
 

$88.95

 


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 13 POTS TOTAL.  ORIGINAL Marshall® REPLACEMENT PARTS.  Marshall® MODEL MG50DFX.
Complete replacement Potentiometer Kit for the Marshall® Model MG50DFX.  13 pots on the front panel.  The single gang pots are available with optional dust caps* installed.   The dust caps seal out dust for reliability, longer life, and help prevent "scratchy pots" in later life.
Part #MPK-21
$35.95

Select Option:


Quantity:


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 13 POTS TOTAL.  ORIGINAL Marshall® REPLACEMENT PARTS.  Marshall® MODELS G80RCD and G100RCD.
Complete replacement Potentiometer Kit for the Marshall® Models G80RCD or G100RCD.  13 pots on the front panel.  The single gang pots are available with optional dust caps* installed.   The dust caps seal out dust for reliability, longer life, and help prevent "scratchy pots" in later life.
Part #MPK-22
$35.95

Select Option:


Quantity:


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 10 POTS TOTAL.  ORIGINAL Marshall® REPLACEMENT PARTS.  Marshall® MODEL AVT50.
Complete replacement Potentiometer Kit for the Marshall® Model AVT50 in the ValveState 2000 amp series.  10 pots on the front panel. 
Part #MPK-23
$56.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 5 POTS TOTAL.  Marshall® Models 3005 & 5005 - "LEAD 12", Marshall® Model 5501 "BASS 12" Complete replacement Potentiometer Kit for the Marshall® Lead 12 (Model 3005 or 5005) or Bass 12 (Model 5501).  5 pots on the front panel.  Contains two original Marshall pots (A1M and B4.7K) and three Alpha pots (B22K).   Original Marshall B22K pots are no longer available.
Part #MPK-24
$27.95


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 10 SINGLE GANG POTS.   ORIGINAL Marshall® REPLACEMENT PARTS -  MG30DFX
Complete replacement Potentiometer Kit for the Marshall® MG30DFX with 10 pots on the front panel.  The potentiometers come with dust caps installed.   The dust caps seal out dust for reliability, longer life, and help prevent "scratchy pots" in later life. If not wanted, the dust covers may be removed with a pair of pliers.
Part #MPK-25
$25.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 10 POTS TOTAL.  ORIGINAL Marshall® REPLACEMENT PARTS.  Marshall® MODELS DSL50 or DSL100 in the JCM2000 SERIES.
Complete replacement Potentiometer Kit for the Marshall® Model DSL50 or the DSL100 in the JCM2000 amp series.  10 pots on the front panel. 
Part #MPK-26
$56.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 10 POTS TOTAL.  Marshall® MODELS 5210 and 5212.
Complete replacement Potentiometer Kit for the Marshall® Models 5210 (1-12" speaker) and 5212 (2-12" Speakers).  10 pots on the front panel.  Contains five original Marshall pots and five Alpha pots (B22K).   Original Marshall B22K pots are no longer available.
Part #MPK-27
$48.95


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 9 POTS TOTAL.  ORIGINAL Marshall® REPLACEMENT PARTS, for MARSHALL VS30R.
Complete replacement Potentiometer Kit for the Marshall® ValveState Model VS30R.  9 pots on the front panel.
Part #MPK-29
 

$51.95

 


Click on photo for
larger view
COMPLETE Marshall® PREMIUM Potentiometer Kit, 6 POTS.    Marshall® MODELS JCM800/4104, JCM800/2103, JCM800/2203, JCM800/2104, JCM800/2204, JCM800/4010.  MARSHALL JCM800 MK2 LEAD SERIES.    Complete replacement Potentiometer Kit for the Marshall® Models 4104, 4010, 2103, 2203, 2104, and 2204.   6 pots on the front panel - presence, bass, middle, treble, master volume, preamp volume.  

There are two different kits, depending on when your amp was manufactured.   The early 80s models had wired pots with smooth shafts and set-screw knobs.   If your amp has set-screw knobs, you need the "CTS" version of this kit.

If your knobs are push-on, and the shafts of the pots are "knurled" or "splined", you have a later version and you need the "PC" version of this kit.    "PC" version of the kit contains four original Marshall pots and two Alpha pots (B22K).   Original Marshall B22K pots are no longer available.

Part #MPK-31-XX  

$28.95

Select Option:


Quantity:


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 12 POTS TOTAL.  Marshall® JCM800 MODELS 2205 AND 2210 - LATER VERSIONS (STARTING IN 1988)  Complete replacement Potentiometer Kit for the Marshall® 2205 and 2210.  11 pots on the front panel and one on the rear panel. Not for the early 2205/2210 versions.   If your model has set-screw knobs (rather than push-on knobs), this is not the correct kit.   Contains ten original Marshall pots and two Alpha pots (B22K and dual-gang A1M).   Original Marshall B22K and dual gang A1M pots are no longer available.   Also includes replacement knob with set-screw for the dual-gang A1M smooth shaft pot.
Part #MPK-32
$59.95


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 9 POTS TOTAL.  Marshall® Artist 3203 and 4203  Complete replacement Potentiometer Kit for the Marshall® 3203 (30 Watt Head) and 4203 (30W 1x12" Combo).  9 pots on the front panel.   Contains seven original Marshall pots and two Alpha pots (B22K).   Original Marshall B22K pots are no longer available.
Part #MPK-33
$48.95


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 6 POTS TOTAL.  Marshall® Master Lead Combo Model 5010 Complete replacement Potentiometer Kit for the Marshall® 5010 (30 Watt Combo).  6 pots on the front panel.   Contains three original Marshall pots and three Alpha pots (B22K).   Original Marshall B22K pots are no longer available.
Part #MPK-34
$31.95


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 8 SINGLE GANG POTS.   ORIGINAL Marshall® REPLACEMENT PARTS -  MG15DFX
Complete replacement Potentiometer Kit for the Marshall® MG15DFX combo with 8 pots on the front panel.   Instructions included.  The potentiometers come with dust caps installed.   The dust caps seal out dust for reliability, longer life, and help prevent "scratchy pots" in later life. If not wanted, the dust covers may be removed with a pair of pliers.
Part #MPK-35
$21.95  


Click on photo for
larger view
Complete Marshall® Potentiometer Kit, 5 POTS TOTAL.  Marshall® MODEL 5002 - "LEAD 20"
Complete replacement Potentiometer Kit for the Marshall® Lead 20 (Model 5002).  5 pots on the front panel.  Contains three original Marshall pots (A1M and B4.7K) and two Alpha pots (B22K).   Original Marshall B22K pots are no longer available.
Part #MPK-36
$27.95

Fender® Pot Kits
Cross Reference Table is at the bottom of this page

   

Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Bandmaster Amp AA763, Bandmaster Amp AB763, Bandmaster Amp AD1269, Deluxe Amp AB763, Pro Amp AA763, Pro Amp AB763, Tremolux Amp AA763, Tremolux Amp AB763, Vibrolux Amp AA763, Vibrolux Amp AB763.   Contains 8 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains 3 replacement carbon comp resistors which are directly attached to certain pots in the kit.    Contains two 1MA (2-35 taper), two 250KA, two 250KA (2-35 taper), one 3MRA, one 50KRA CTS pots, plus two 6800 and one 100K carbon comp resistors.    Two volume, two treble, two bass, one speed, one intensity.   The volume pots, treble pots, and speed pots have brass-colored shafts; the other pots have silver-colored shafts.   See Cross Reference Table
Part #FPK-101
$39.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Bandmaster Reverb AA768, Bandmaster Reverb AA1069, Bandmaster Reverb AA270, Pro Reverb AB668, Pro Reverb AA1069, Pro Reverb AA270, Super Reverb AA763, Super Reverb AB763, Super Reverb AB568, Super Reverb AA1069, Super Reverb AA270.  Contains 10 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains 2 replacement carbon comp resistors which are directly attached to certain pots in the kit.    Contains two 1MA (2-35 taper), two 250KA, two 250KA (2-35 taper), one 10KA, one 100KB, one 3MRA, one 50KRA CTS pots, plus one 6800 and one 100K carbon comp resistors.    Two volume, two treble, one middle, two bass, one reverb, one speed, one intensity.   The volume pots, treble pots, and speed pots have brass-colored shafts; the other pots have silver-colored shafts.   See Cross Reference Table
Part #FPK-102
$47.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:  Bassman AB165, Bassman AC568, Bassman AA270, Bassman AA371.   Contains 6 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Contains two 1MA (2-35 taper), two 250KA, and two 250KA (2-35 taper).  Also contains 2 replacement carbon comp resistors which are directly attached to certain pots in the kit.  Two volume, two treble, two bass.  The volume pots, treble pots, and speed pots have brass-colored shafts; the other pots have silver-colored shafts.   See Cross Reference Table
Part #FPK-103
$27.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Bassman AA165.  Contains 6 metal-shaft CTS pots, with the correct values and tapers to match the original pots.   Also contains 2 replacement carbon comp resistors which are directly attached to certain pots in the kit.  Contains two 1MA (2-35 taper), two 250KA, and two 250KA (2-35 taper).   Two volume, two treble, two bass.  The volume pots, treble pots, and speed pots have brass-colored shafts; the other pots have silver-colored shafts.   See Cross Reference Table
Part #FPK-103A
$27.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Deluxe Reverb AA763, Deluxe Reverb AB763, Deluxe Reverb AB868, Deluxe Reverb A1270, Deluxe Reverb A1172, Pro Reverb AA165, Vibrolux Reverb AA964, Vibrolux Reverb AB568, Vibrolux Reverb AA270, Vibroverb AA763, Vibroverb AB763.  Contains 9 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains 3 replacement carbon comp resistors which are directly attached to certain pots in the kit.    Contains two 1MA (2-35 taper), two 250KA, two 250KA (2-35 taper), one 100KB, one 3MRA, one 50KRA CTS pots, plus two 6800 and one 100K carbon comp resistors.    Two volume, two treble, two bass, one reverb, one speed, one intensity.   The volume pots, treble pots, and speed pots have brass-colored shafts; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-104
$42.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Deluxe Reverb or Vibrolux Reverb with Volume Boost - Silverface, 1977-1980.   Contains 8 metal-shaft CTS pots and one CTS pot with metal shaft and push-pull switch, with the correct values and tapers to match the original pots.  Also contains 3 replacement carbon comp resistors which are directly attached to certain pots in the kit.  Contains two 1MA (2-35 taper), two 250KA, two 250KA (2-35 taper), one 100KB, one 3MRA, one 50KRA CTS pots, plus two 6800 and one 100K carbon comp resistors.    Two volume, two treble, two bass, one reverb, one speed, one intensity.   The volume pots, treble pots, and speed pots have brass-colored shafts; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-104A
$49.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Dual Showman Reverb AA768, Dual Showman Reverb AA769, Dual Showman Reverb AA270, Twin Reverb AB763, Twin Reverb AC568, Twin Reverb AA769, Twin Reverb AA270.   Contains 11 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains one replacement carbon comp resistor which is directly attached to one of the pots in the kit.    Contains two 1MA (2-35 taper), two 250KA, two 250KA (2-35 taper), two 10KA, one 100KB, one 3MRA, one 50KRA CTS pots, plus one 100K carbon comp resistor.    Two volume, two treble, two middle, two bass, one reverb, one speed, one intensity.   The volume pots, treble pots, and speed pots have brass-colored shafts; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-105
$49.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:   Princeton Amp AA964.  Contains 5 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains 2 replacement carbon comp resistors which are directly attached to certain pots in the kit.    Contains one 1MA (2-35 taper), one 250KA, one 250KA (2-35 taper), one 3MRA, one 250KL CTS pots, plus one 6800 and one 100K carbon comp resistors.    One volume, one treble, one bass, one speed, one intensity.   The volume pots, treble pots, and speed pots have brass-colored shafts; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-106
$24.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Princeton Reverb AA1164, Princeton Reverb B1270.  Contains 6 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains 2 replacement carbon comp resistors which are directly attached to certain pots in the kit.    Contains one 1MA (2-35 taper), one 250KA, one 250KA (2-35 taper), one 100KB, one 3MRA, one 250KL CTS pots, plus one 6800 and one 100K carbon comp resistors.    One volume, one treble, one bass, one reverb, one speed, one intensity.   The volume pots, treble pots, and speed pots have brass-colored shafts; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-107
$29.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Showman Amp AA763, Showman Amp AB763.  Contains 9 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains two replacement carbon comp resistor which is directly attached to one of the pots in the kit.    Contains two 1MA, four 250KA, one 10KA, one 3MRA, one 50KRA CTS pots, plus one 6800 and one 100K carbon comp resistors.    Two volume, two treble, one middle, two bass, one speed, one intensity.   The speed pot has a brass-colored shaft; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-108
$43.95


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - 65 TWIN REVERB REISSUE.  Contains all 11 control pots as found in the 65 Twin Reverb Reissue, from 1991 to the present.   Also fits the 68 Custom Twin Reverb from 2012 to the present.   Does not include the bias pot.
INCLUDES NUTS & WASHERS

Part #FPK-109
$47.95  


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - 65 DELUXE REVERB REISSUE.  Contains all 9 control pots as found in the 65 Deluxe Reverb Reissue, from 1993 to the present.   Also fits the 68 Custom Deluxe Reverb and the 68 Custom Vibrolux Reverb from 2012 to the present.  Does not include the bias pot.
INCLUDES NUTS & WASHERS

Part #FPK-110
$39.95  


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - 65 SUPER REVERB REISSUE.  Contains all 10 control pots as found in the 65 Super Reverb Reissue, from 2001 to the present.  Does not include the bias pot.
INCLUDES NUTS & WASHERS

Part #FPK-111
$43.95  


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - 65 PRINCETON REVERB REISSUE.  Contains all 6 control pots as found in the 65 Princeton Reverb Reissue, from 2008 to the present.  Also fits the 68 Custom Princeton Reverb, from 2013 to the present.  Does not include the bias pot.
INCLUDES NUTS & WASHERS

Part #FPK-112
$27.95  


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - HOT ROD DELUXE AND HOT ROD DEVILLE (ORIGINAL VERSIONS - NOT VERSION III).  Contains all 8 control pots as found in the Hot Rod Deluxe and Hot Rod Deville models, from 1996 to 2010.  Does not include the Hot Rod Deluxe III or Hot Rod Deville III (with black control panel).
INCLUDES NUTS & WASHERS

Part #FPK-113
$31.95  


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - BLUES DELUXE AND BLUES DEVILLE (ORIGINAL VERSIONS - NOT REISSUE VERSIONS).  Contains all 8 control pots as found in the original Blues Deluxe and Blues Deville models, from 1993 to 2004.  For the Blues Deluxe Reissue and Blues Deville Reissue models from 2005 to the present, see the FPK-115 kit below.
INCLUDES NUTS & WASHERS
Part #FPK-114
$31.95  


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - BLUES DELUXE REISSUE AND BLUES DEVILLE REISSUE.  Contains all 8 control pots as found in the Blues Deluxe Reissue and Blues Deville Reissue models, from 2005 to the present. 
INCLUDES NUTS & WASHERS
Part #FPK-115
$31.95  


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - BLUES JUNIOR.  Contains all 6 control pots as found in the Blues Junior and Blues Junior III (all versions) from 1993 to the present.
Part #FPK-116
$39.95


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - PRO JUNIOR.  Contains both control pots as found in the Pro Junior and Pro Junior III (all versions) from 1993 to the present.
Part #FPK-116A
$13.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Bassman 135 (Silverface, 1977-1983).   Contains 9 metal shaft CTS pots, with the correct values and tapers to match the original pots.  Contains three 1MA (J  taper), two 250KA, two 250KA (J taper), two 10KA CTS pots.   Two volume, two treble, two middle, two bass, one master volume.  The volume pots and treble pots have brass-colored shafts; the other pots have silver-colored shafts.   See Cross Reference Table
Part #FPK-117
$39.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Bassman 100 (Silverface Head, 1972-1976) and Bassman Ten (Silverface Combo, 1972-1982).  Note:  This is NOT for the small Bassman 100 combo from recent years, and is NOT for the Bassman 100T blackface head currently on the market.  Contains 8 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Contains three 1MA (2-35 taper), two 250KA, two 250KA (2-35 taper), and one 10KA CTS pot.  Two volume, two treble, one middle, two bass, one master volume.   The volume pots and treble pots have brass-colored shafts; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-118
$36.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Super Bassman (Silverface Head, 1969-1971), Bantam Bass Amp (Silverface Combo, 1969-1971)  Note:  This is NOT for the new blackface Super Bassman head from recent years.  Contains 7 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains one replacement carbon comp resistor which is directly attached to one of the pots in the kit.    Contains two 1MA (2-35 taper), two 250KA, two 250KA (2-35 taper, and one 10KA pot, and an 8.2K resistor.  Two volume, two treble, one middle, two bass.  The volume pots and treble pots have brass-colored shafts; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-118A
$31.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Bassman 50 Silverface Head (1971-1976).  Contains 6 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains two replacement carbon comp resistors which are directly attached to certain pots in the kit.    Contains two 1MA (2-35 taper), two 250KA, two 250KA (2-35 taper) pots, plus one 6800 ohm and one 8200 ohm carbon comp resistors.  Two volume, two treble, two bass.   The volume pots and treble pots have brass-colored shafts; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-118B
$27.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Bassman 70 Silverface Head (1977-1983).  Contains 7 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains two replacement carbon comp resistors which are directly attached to certain pots in the kit.    Contains three 1MJ, two 250KA, two 250KJ, plus one 6800 ohm and one 8200 ohm carbon comp resistors.  Two volume, two treble, two bass, one master volume.   The volume pots and treble pots have brass-colored shafts; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-118C
$33.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Bassman 20 Blackface Combo (1982-1983).  Contains 4 metal shaft CTS pots, with the correct values and tapers to match the original pots.  Contains one 1MJ, two 250KJ, and one 10KA CTS pots.  One volume, one treble, one bass, one middle.   The volume pots, bass and treble pots have brass-colored shafts; the mid pot has a silver-colored shaft.  See Cross Reference Table
Part #FPK-118D
$19.95


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Champ 5C1 (1953), Champ 5D1 (1954), Champ 5E1 (1955-1956), Champ 5F1 (1956-1964).   Contains a replacement volume control with rotary AC power switch as found in the tweed Champ 5C1, 5D1, 5E1 and 5F1 from 1953 to 1964.  See Cross Reference Table
Part #FPK-119
$4.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Champ AA764 (Blackface, 1964-1967), Champ CBS design (Silverface, 1968-1982).  Contains 3 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  Also contains a 15K carbon comp resistor which is attached to the bass pot.  Contains one 1MA, and two 250KA pots.   One volume, one bass, one treble.  See Cross Reference Table
Part #FPK-120
$13.95 


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Deluxe 5A3, 5B3.   Contains three 1MA controls, one equipped with a rotary AC power switch.   As found in the tweed Deluxe 5A3 and 5B3 from 1948-1953.   See Cross Reference Table
Part #FPK-121
$8.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Deluxe 5C3, 5D3, and 5E3.   Contains three 1MA controls.  As found in the tweed Deluxe 5C3, 5D3 and 5E3 from 1953-1960.   See Cross Reference Table
Part #FPK-122
$5.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Harvard 5F10 and 6G10.    Contains one 1MA and one 1ML controls.  As found in the tweed Harvard 5F10 and 6G10 from 1955-1962.   See Cross Reference Table
Part #FPK-123
$3.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Princeton 5A2, 5B2, 5C2, and 5D2.     Contains two 1MA controls, one equipped with a rotary AC power switch.  As found in the tweed Princeton 5A2, 5B2, 5C2, and 5D2 from 1948-1955.   See Cross Reference Table
Part #FPK-124
$6.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:   Princeton 6G2.     Contains two 1MA controls, one 3MRA, and one 250KL.   Also includes a 100K resistor.  Metal shaft CTS pots, with the correct values and tapers to match the original pots.  As found in the brownface  Princeton Amp 6G2 from 1963.  The speed pot has a brass-colored shaft; the other pots have silver-colored shafts.  See Cross Reference Table
Part #FPK-125
$18.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:  Super 5A4, 5B4, 5C4, and 5D4.   Contains three 1MA controls.  As found in the tweed Super 5A4, 5B4, 5C4, and 5D4 from 1947-1955.   See Cross Reference Table
Part #FPK-126
$5.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:  Super 5E4, 5E4A, 5F4   Contains four 1MA and one 5KL controls.  As found in the tweed Super 5E4, 5E4A, and 5F4 from 1955-1960.   See Cross Reference Table
Part #FPK-127
$9.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:  Vibrolux 5E11, 5F11.   Contains one 1MA, one 1ML, one 250KL and one 2ML controls.  As found in the tweed Vibrolux 5E11 and 5F11 from 1956-1961.   See Cross Reference Table
Part #FPK-128
$7.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:  Pro Amp 5C5, 5D5, 5E5.   Contains three 1MA controls.  As found in the tweed Pro 5C5, 5D5, and 5E5 from 1952-1960.   See Cross Reference Table
Part #FPK-129
$5.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:  57 Twin Reissue and 57 Pro-Amp Reissue (2009-Present, Fender Custom Shop)   Contains five metal-shaft CTS potentiometers.  As found in the tweed 57 Twin Amp and 57 Pro-Amp starting in 2009.   See Cross Reference Table
Part #FPK-130
$20.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  57 Deluxe Reissue (2009-present, Fender Custom Shop)   Contains three metal-shaft CTS potentiometers.  As found in the tweed 57 Custom Deluxe starting in 2009.   See Cross Reference Table
Part #FPK-131
$12.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  57 Champ Reissue (2009-present, Fender Custom Shop)   Contains one metal-shaft CTS potentiometer.  As found in the tweed 57 Champ starting in 2009.   See Cross Reference Table
Part #FPK-132
$4.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:  Ultra Chorus and Ultimate Chorus, 1990s era.  NOT FOR the ULTIMATE CHORUS DSP, introduced in 2000.   Contains fourteen D-Shaft snap-in potentiometers.   See Cross Reference Table
Part #FPK-133
$49.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Deluxe 112 (PR205), early 1990s era.  NOT FOR the DELUXE 112 PLUS (PR291), introduced in 1995.   Contains ten D-Shaft snap-in potentiometers.   See Cross Reference Table
Part #FPK-134
$38.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Deluxe 112 Plus (PR291), mid 1990s era.  NOT FOR the ORIGINAL DELUXE 112 (PR205), introduced in 1993.   Contains ten D-Shaft snap-in potentiometers.   See Cross Reference Table
Part #FPK-135
$38.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Champ II (Blackface, Rivera Era, 1982-1983)   Contains three metal-shaft CTS potentiometers and one metal shaft potentiometer with pull switch (treble control).  Also includes one 10M resistor.  See Cross Reference Table.



Part #FPK-136

$27.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Performer 650 (PR242), mid 1990s era.  NOT FOR the PERFORMER 1000 (PR209).   Contains ten D-Shaft snap-in potentiometers.   See Cross Reference Table
Part #FPK-137
$38.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Performer 1000 (PR209), mid 1990s era.  NOT FOR the PERFORMER 650 (PR242).   Contains twelve D-Shaft snap-in potentiometers.   See Cross Reference Table
Part #FPK-138
$46.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Roc Pro 700 (PR242), mid 1990s era.  NOT FOR the ROC PRO 1000 (PR209).   Contains ten D-Shaft snap-in potentiometers.   See Cross Reference Table
Part #FPK-139
$38.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Roc Pro 1000 (PR209), mid 1990s era.  NOT FOR the ROC PRO 700 (PR242).   Contains twelve D-Shaft snap-in potentiometers.   See Cross Reference Table
Part #FPK-140
$46.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Stage 112SE (PR203), 1992-1995.  Contains ten D-Shaft snap-in potentiometers.   See Cross Reference Table
Part #FPK-141
$38.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Frontman 15R with metal type split/knurled shafts.  *Note:  This kit is designed for versions that have metal shaft pots with a split cut down the shaft approximately 5/16" long, and the outside of the shaft is "knurled" or "splined" with ridges.    This kit will NOT work on versions which have pots with a black plastic shaft that is smooth with a flat surface on one side (half-moon shaft or "D"-shaped shaft).  No kit exists to replace that type of pot.  Contains seven potentiometers.   See Cross Reference Table
Part #FPK-142
$19.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  Frontman 25R with metal type split/knurled shafts.  *Note:  This kit is designed for versions that have metal shaft pots with a split cut down the shaft approximately 5/16" long, and the outside of the shaft is "knurled" or "splined" with ridges.    This kit will NOT work on versions which have pots with a black plastic shaft that is smooth with a flat surface on one side (half-moon shaft or "D"-shaped shaft).  No kit exists to replace that type of pot.  Contains seven potentiometers.   See Cross Reference Table
Part #FPK-143
$19.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  M-80 Chorus (PR154, 1990-1993).  (Does not fit other M-80 models - only the M-80 Chorus).  Contains 11 potentiometers.   See Cross Reference Table
Part #FPK-144
$42.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  M-80 Pro or M-80 HM series. (1990-1993).  (Does not fit other M-80 models - only the M-80 Pro or M-80 HM Series).  Contains 9 potentiometers.   See Cross Reference Table
Part #FPK-144A
$34.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  H.O.T (PR141, 1990-1991)   Contains 3 potentiometers.   See Cross Reference Table
Part #FPK-145
$20.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifier ONLY:  R.A.D. Guitar Amp (PR137, 1989-1991)   Contains 2 potentiometers.   See Cross Reference Table
Part #FPK-146
$13.95  


Click on photo for
larger view
Complete Fender® Potentiometer Kit, 11 Pots total.  Fender® Sidekick Switcher or Sidekick Reverb 65, from  The late 1980s.  Complete replacement Potentiometer Kit for the Fender® Sidekick Switcher and the Sidekick Reverb 65, as shown below.  11 pots on the front panel. 




Part #FPK-147A

$30.95  


Click on photo for
larger view
Complete Fender® Potentiometer Kit, 5 Pots total.  Fender® Sidekick Bass, Sidekick Bassman, or Bassman 60 from  The late 1980s.  Complete replacement Potentiometer Kit for the Fender® Sidekick Bass, Sidekick Bassman, and the Bassman 60 1x15 combo, as shown below.  5 pots on the front panel.   (Not for the Sidekick 35 Bass or Sidekick 65 Bass models.   Also not for the newer Bassman 60 kickback combo models introduced in the 2000s).




Part #FPK-147B

$14.95  


Click on photo for
larger view
Complete Fender® Potentiometer Kit, 7 Pots total.  Fender® Sidekick 15 Reverb Model, from the mid 1980s.  Complete replacement Potentiometer Kit for the Fender® Sidekick 15 Reverb.  7 pots on the front panel. 

 

Part #FPK-147C

$19.95  


Click on photo for
larger view
Complete Fender® Potentiometer Kit, 8 Pots total.  Fender® Sidekick 15 Chorus Model, from the mid 1980s.  Complete replacement Potentiometer Kit for the Fender® Sidekick 15 Chorus.  8 pots on the front panel. 

 

Part #FPK-147D

$22.95  


Click on photo for
larger view
Complete Fender® Potentiometer Kit, 1 Pot total.  Fender® Champion 600 from 2006-2011.   The Champion 600 Reissue model contains just one potentiometer, for volume.  This is the replacement pot.


Part #FPK-148
$6.95  


Click on photo for
larger view
Fender® Potentiometer Set - Fender 75 Amp Series (Combo or Head)  Contains 8 metal-shaft CTS pots, with the correct values and tapers to match the original pots.  3 of the pots (Bass, Middle and Treble) have pull switches for the individual "boost" functions associated with those controls.   Contains two A1M, two A250K with pull boost, one A10K with pull boost, and three B100K CTS pots.   
Part #FPK-149

$59.95


Click on photo for
larger view
Partial Fender® Potentiometer Set for the following amplifier ONLY:  Deluxe 85 (PR46) introduced in 1988.  (Does not fit the Studio 85 or Eighty-Five amp PR38 from the same era).  Contains ten potentiometers.  The Limiter potentiometer is no longer available and is not part of the kit.  Instructions included.

Part #FPK-150
$38.95  


Click on photo for
larger view
Partial Fender® Potentiometer Set for the following amplifier ONLY:  Princeton Chorus (PR82) introduced in 1998, also known as the Princeton Stereo Chorus. (Does not fit the Princeton Chorus DSP PR424 from 1999).  Contains ten potentiometers.  The Limiter potentiometer is no longer available and is not part of the kit.  Instructions included.

Part #FPK-151
$38.95  


Click on photo for
larger view
Partial Fender® Potentiometer Set for the following amplifier ONLY:  Bassman 250 PR597.   Contains all pots except for the Low Mid Freq and the High Mid Freq - those pots are no longer available.   A total of 11 pots is included in the kit, along with instructions.

Part #FPK-152
$42.95  


Click on photo for
larger view
Partial Fender® Potentiometer Set for the following amplifier ONLY:  Champ 25SE (PR201), mid 1990s era.   Does not include the Loudness control pot which is no longer available.   Contains ten D-Shaft snap-in potentiometers.  

Part #FPK-153
$38.95  


Click on photo for
larger view
Fender® Potentiometer Set for the following amplifiers ONLY:  Fender Musicmaster Bass Amp (Silverface, 1970-1982) Contains two metal-shaft CTS potentiometers. 
Part #FPK-154
$9.50  


Click on photo for
larger view
Partial Fender® Potentiometer Set for the following amplifier ONLY:  Studio 85, introduced in 1988.  Contains all pots except for the limiter pot, which has been discontinued.   Contains eight D-Shaft snap-in potentiometers.

Part #FPK-201
$31.95  


Click on photo for
larger view
Partial Fender® Potentiometer Set for the following amplifier ONLY:  Deluxe 90 DSP, introduced in 2002.   Does not include the Clean Channel Middle control pot which is no longer available.   Also not included is the FX Select control, which is a special digital encoder and is not a potentiometer.  Contains ten D-Shaft snap-in potentiometers.  

Part #FPK-202
$38.95  


Click on photo for
larger view
Fender® Partial Potentiometer Set for the following amplifiers ONLY:  Pro 185, Stage 185, London 185.  Contains twelve D-Shaft snap-in potentiometers.   Contains all pots used in these amps except for the Contour control and the Gain Offset control (on the rear panel).   Those two pots are no longer available.
Part #FPK-203
$46.95  

PARTIAL FENDER POTENTIOMETER KIT - TWIN AMP (PRO TUBE SERIES).  Contains all front panel pots except for the vibrato intensity control (that pot is no longer available).   12 Pots total in the kit for the Twin Amp (produced from 2001-2009)  The Twin Amp for which this kit is designed has both vibrato and reverb, and also has two white push switches on the front panel (bright and channel select).  

Another similar Twin Amp made from 1995-2001 does not have vibrato, has no front panel push switches, and this pot kit is not for that particular model.
Part #FPK-209
$46.95

 

Fender Cross Reference Table:

 
 
Amplifier Model and Date Code

Pot Set

 
75 Combo (1980-1982) FPK-149
75 Head (1980-1982) FPK-149
Bandmaster Amp AA763 (Blackface) FPK-101
Bandmaster Amp AB763 (Silverface) FPK-101
Bandmaster Amp AD1269 (Silverface) FPK-101
Bandmaster Rev AA768 (Silverface) FPK-102
Bandmaster Reverb AA1069 (Silverface) FPK-102
Bandmaster Reverb AA270 (Silverface) FPK-102
Bantam Bass CFA7003 (Silverface Combo, 1969-1971) FPK-118A
Bassman AA165 (Blackface Head) FPK-103A
Bassman AB165 (Blackface Head) FPK-103
Bassman AC568 (Silverface Head) FPK-103
Bassman AA270 (Silverface Head) FPK-103
Bassman AA371 (Silverface Head) FPK-103
Bassman 10 or Bassman Ten (Silverface Combo, 1972-1982) FPK-118
Bassman 20 (Blackface Combo, 1982-1983) FPK-118D
Bassman 50 (Silverface Head, 1971-1976) FPK-118B
Bassman 60 (Blackface Combo, late 1980s 1x15 combo) FPK-147B
Bassman 70 (Silverface Head, 1977-1983) FPK-118C
Bassman 100 (Silverface Head, 1972-1976) FPK-118
Bassman 135 (Silverface Head, 1977-1983) FPK-117
Bassman 250 PR597 Partial Kit FPK-152
Super Bassman (Silverface Head, 1969-1971) FPK-118A
Blues Deluxe/Deville (Original - 1993-2004) FPK-114
Blues Deluxe/Deville (Reissue - 2005-Present) FPK-115
Blues Junior (1993-Present) FPK-116
Champ 5C1, 5D1, 5E1, 5F1 (1953-1964) FPK-119
57 Champ Amp Reissue (Tweed, 2009-present) FPK-132
Champ Blackface/Silverface AA764 (1964-1982) FPK-120
Champ II (Blackface, 1982-1983) FPK-120
Champ 25SE PR201 Partial Kit FPK-153
Champion 600 Reissue (2006-2011) FPK-148
Deluxe Tweed 5A3, 5B3 (1948-1953) FPK-121
Deluxe Tweed 5C3, 5D3, 5E3 (1953-1960) FPK-122
57 Deluxe Reissue (Tweed, 2009-present) FPK-131
Deluxe 112 PR205 (Introduced in 1993) FPK-134
Deluxe 112 Plus PR291 (Introduced in 1995) FPK-135
Deluxe 85 PR46 (Introduced in 1988) FPK-150
Deluxe AB763 (Blackface) FPK-101
Deluxe Reverb AA763 (Blackface) FPK-104
Deluxe Reverb AB763 (Blackface) FPK-104
Deluxe Reverb AB868 FPK-104
Deluxe Reverb A1270  (Silverface) FPK-104
Deluxe Reverb A1172 (Silverface) FPK-104
Deluxe Reverb with Volume Boost (1977-1980) FPK-104A
65 Deluxe Reverb Reissue (1993-present)
(NOT for the Deluxe Reverb II)
FPK-110
68 Custom Deluxe Reverb (Silverface, Drip Edge, 2012-present) FPK-110
Dual Showman Reverb AA768 (Silverface, 1968) FPK-105
Dual Showman Reverb AA270 (Silverface, 1970-?) FPK-105
Dual Showman Reverb AA769 (Silverface, 1969) FPK-105
Fender 75 Combo (1980-1982) FPK-149
Fender 75 Head (1980-1982) FPK-149
Frontman 15R (With Knurled, Split-Shaft pots only - see notes*) FPK-142
Frontman 25R (With Knurled, Split-Shaft pots only - see notes*) FPK-143
Harvard 5F10, 6G10 (Tweed) FPK-123
H.O.T. Guitar Amp (PR141, 1990-1991) FPK-145
Hot Rod Deluxe/Deville (Original - Not version III) FPK-113
London 185 Partial Kit (1988-1991) FPK-203
M-80 Chorus (PR154, 1990-1993) FPK-144
M-80 Pro and HM Series (PR97, 1990-1993) FPK-144A
Musicmaster Bass Amp (Silverface, 1970-1982) FPK-154
Performer 650 (PR242, mid 1990s) FPK-137
M-80 Chorus (PR154, 1990-1993) FPK-144
London 185 Partial Kit (1988-1991) FPK-203
M-80 Pro and HM Series (PR97, 1990-1993) FPK-144A
Performer 650 (PR242, mid 1990s) FPK-137
Performer 1000 (PR209, mid 1990s) FPK-138
Princeton 5A2, 5B2, 5C2, 5D2 (Tweed, 1948-1955) FPK-124
Princeton 6G2 (Brownface, 1963) FPK-125
Princeton AA964 (Blackface) FPK-106
Princeton Chorus PR82 Partial Kit FPK-151
Princeton Reverb AA764, AA1164 (Blackface) FPK-107
Princeton Reverb B1270 (Silverface) FPK-107
65 Princeton Reverb Reverb Reissue (2008-present) (NOT for the Princeton Reverb II) FPK-112
68 Custom Princeton Reverb (Silverface, Drip Edge, 2013) FPK-112
Pro 185 Partial Kit (1988-1991) FPK-203
Pro Amp 5C5, 5D5, 5E5 (Tweed, 1952-1960) FPK-129
57 Pro Amp Reissue (Tweed, 2009-present) FPK-130
Pro Amp AA763 (Blackface) FPK-101
Pro Amp AB763 (Blackface) FPK-101
Pro Junior and Pro Junior III (1993-present) FPK-116A
Pro Reverb AA165 (Blackface) FPK-104
Pro Reverb AB668 FPK-102
Pro Reverb AA1069 (Silverface) FPK-102
Pro Reverb AA270 (Silverface) FPK-102
R.A.D. Guitar Amp PR137 (1989-1991) FPK-146
Roc Pro 700 (PR242, mid 1990s) FPK-139
Roc Pro 1000 (PR209, mid 1990s) FPK-140
75 Combo (1980-1982) FPK-149
75 Head (1980-1982) FPK-149
Showman Amp AA763 (Blackface) FPK-108
Showman Amp AB763 (Blackface) FPK-108
Sidekick Bass (Mid 1980s - 5 Pots Total) FPK-147B
Sidekick Bassman (Mid 1980s - 5 Pots Total) FPK-147B
Sidekick Chorus 20 (Mid 1980s - 9 Pots Total) FPK-147E
Sidekick 15 Chorus (Mid 1980s - 8 Pots Total) FPK-147D
Sidekick 15 Reverb (Mid 1980s - 7 Pots Total) FPK-147C
Sidekick Reverb 65 (Mid 1980s - 11 Pots Total) FPK-147A
Sidekick Switcher (Mid 1980s - 11 Pots Total) FPK-147A
Stage 112SE (PR203, 1992-1995) FPK-141
Stage 185 Partial Kit (1988-1991) FPK-203
Studio 85 Partial Kit (1988-1990) FPK-201
Super 5A4, 5B4, 5C4, 5D4 (Tweed, 1947-1955) FPK-126
Super 5E4, 5E4A, 5F4 (Tweed, 1955-1960) FPK-127
Super Bassman (Silverface Bass Head, 1969-1971) FPK-118A
Super Reverb AA763 (Blackface) FPK-102
Super Reverb AB763 (Blackface) FPK-102
Super Reverb AB568 FPK-102
Super Reverb AA1069 (Silverface) FPK-102
Super Reverb AA270 (Silverface) FPK-102
65 Super Reverb Reissue (2001-present) FPK-111
Tremolux Amp AA763 (Blackface) FPK-101
Tremolux Amp AB763 (Blackface) FPK-101
57 Twin Amp Reissue (Tweed, 2009-present) FPK-130
Twin Amp Partial Kit (Pro Tube Series, PR449, 2001-2009) FPK-209
Twin Reverb AB763 (Blackface) FPK-105
Twin Reverb AC568 FPK-105
Twin Reverb AA769 (Silverface) FPK-105
Twin Reverb AA270 (Silverface) FPK-105
65 Twin Reverb Reissue (1991-present)
NOT for Twin Reverb II, or other Twin versions
FPK-109
68 Custom Twin Reverb (Silverface, Drip Edge, 2012-present) FPK-109
Ultra Chorus (early 1990s)  FPK-133
Ultimate Chorus (early 1990s)  NOT Ultimate Chorus DSP FPK-133
Vibrolux Amp AA763 (Blackface) FPK-101
Vibrolux Amp AB763 (Blackface) FPK-101
Vibrolux Reverb AA964 (Blackface) FPK-104
Vibrolux Reverb AB568 FPK-104
Vibrolux Reverb AA270 (Silverface) FPK-104
Vibrolux Reverb with Volume Boost (Silverface, 1977-1980) FPK-104A
68 Custom Vibrolux Reverb (Silverface, Drip Edge, 2012-present) FPK-110
Vibroverb AA763 (Blackface) FPK-104
Vibroverb AB763 (Blackface) FPK-104
 

*Note:  Fender® Potentiometer Set for the following amplifier ONLY:  Frontman 15R or 25R with metal type split/knurled shafts.   This kit is designed for versions that have metal shaft pots with a split cut down the shaft approximately 5/16", and the outside of the shaft is "knurled" or "splined" with ridges.    This kit will NOT work on versions which have pots with a black plastic shaft that is smooth with a flat surface on one side (half-moon shaft or "D"-shaped shaft).  No kit exists to replace that type of pot.

For other brown and blonde "brownface" models from 1960-1963, see our pots here

Do you not see your exact amp model (with identical date code)?    Contact us for more information.

Have a 1970s silverface amp with Master Volume?   Contact us for more information.

Unable to find the date code?    No tube chart in the cabinet?  Contact us for more information.

the date code for blackface and silverface amplifiers from the 1960s and 1970s is located on the tube chart inside the back of the amplifier cabinet.  The following is a Super Reverb AB763:

 

Copyright ©2021 Studio Sound Electronics - All Rights Reserved
Not responsible for web site errors or omissions.
  WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov