These are the most commonly replaced parts in Fender™ Blues Deluxe models from 1995 through the present.


Pots     Jacks     Switches     Pilot Light     Hardware
    
Reverb     Tube Sockets     Relay     Resistors     Diode

      Back to Fender™ Parts Index


Photo

Description

Price Purchase

Click on photo for
larger view
 FENDER STYLE POT, SINGLE GANG - BRACKET MOUNT,  SMOOTH 1/4" SHAFT. 
Found in the Blackface Reissue versions (2000-present) of Deluxe Reverb, Princeton Reverb, Pro Reverb, Super Reverb and Twin Reverb.   Also found in various versions of the Blues Deville, Blues Deluxe, Hot Rod Deville, Hot Rod Deluxe.
POT VALUE REPLACES
FENDER PART #
APPLICATION
B25K 0041510000 MIDDLE AND REVERB CONTROLS IN HOT ROD DELUXE / DEVILLE AND BLUES DELUXE / DEVILLE
C25K 0047031000 PRESENCE CONTROL IN HOT ROD DELUXE / DEVILLE AND BLUES DELUXE / DEVILLE
B100K 0037600000  MASTER VOLUME IN BLUES DELUXE REISSUE / BLUES DEVILLE REISSUE
A250K 0037597000
0047540000
   VOLUME, DRIVE, TREBLE, BASS CONTROLS  IN ORIGINAL HOT ROD DELUXE / DEVILLE AND BLUES DELUXE / DEVILLE
A1M 0037596000
0036966000
 BASS AND MASTER VOLUME CONTROLS IN ORIGINAL BLUES DELUXE /  DEVILLE.

INCLUDES NUT & WASHER  (For spare or replacement nut, order the JN-1016 nut found in this section)
Part #FPHD-XX

$3.95

Select Option:


Quantity:


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - BLUES DELUXE AND BLUES DEVILLE (ORIGINAL VERSIONS - NOT REISSUE VERSIONS).  Contains all 8 control pots as found in the original Blues Deluxe and Blues Deville models, from 1993 to 2004.  For the Blues Deluxe Reissue and Blues Deville Reissue models from 2005 to the present, see the FPK-115 kit below.
INCLUDES NUTS & WASHERS
Part #FPK-114
$31.95  


Click on photo for
larger view
FENDER COMPLETE POTENTIOMETER KIT - BLUES DELUXE REISSUE AND BLUES DEVILLE REISSUE.  Contains all 8 control pots as found in the Blues Deluxe Reissue and Blues Deville Reissue models, from 2005 to the present. 
INCLUDES NUTS & WASHERS
Part #FPK-115
$31.95  

New Style:

Old Style:

Click on photo for
larger view
POT - Fender™ BIAS POT 25K LINEAR, SCREW
New style Fender™ 25K linear bias potentiometer.  Used in the reissue 59 Bassman, reissue Hot Rod Deluxe/Deville, reissue Blues Deluxe/Deville.  Fender™ part # 0027873000.   This pot is a drop-in replacement for the original discontinued "blue" bias pot.

Part #FBP-AP25KL
$2.95  

 

Click on photo for
larger view

Available with or without nut and washer.

JACK, 1/4", TIP/SLEEVE 4 PIN, PC MOUNT, Fender, Original and Reissue Blues Deluxe.
Fender
style PC mount 1/4" jack. Mono, 4 pin.  Used as the two input jacks, preamp out jack, and the footswitch jack only on the original 1990s Blues Deluxe.   Not used on the Blues Deluxe Reissue (2000s) or the Blues Deluxe III (2009-  ).  Replaces Fender™ part numbers 0990912000, 0037036000, 990912, 037036, 025929, and 0025929000 and 037036.  Replacement nut/washer is the JN-916.

Available with or without nut/washer - choose in "Options"

Part # J-506
Starting at $1.99
Select Option:


Quantity:

 

Click on photo for
larger view

Available with or without nuts and washers.

SAVE WITH MULTIPACK!  JACK, 1/4", TIP/SLEEVE 4 PIN, PC MOUNT, Fender STYLE  1988 - Present.   PACK OF 6 JACKS.
Fender
style PC mount 1/4" jack. Mono, 4 pin.  Used as the two input jacks, preamp out jack, and the footswitch jack only on the original 1990s Blues Deluxe.   Not used on the Blues Deluxe Reissue (2000s) or the Blues Deluxe III (2009-  ).  Replaces Fender™ part numbers 0990912000, 0037036000, 990912, 037036, 025929, and 0025929000 and 037036.
Pack of 6 Jacks.  Replacement nut/washer is the JN-916.

Available with or without nuts/washers - choose in "Options"

Part # J-506-6
Starting at
$9.75
(For 6 Jacks)
 
Select Option:


Number of 6-Packs:

 

Click on photo for
larger view

Available with or without nut and washer.

JACK, 1/4", TIP/RING/SLEEVE, 9 PIN, PC MOUNT, Fender, Original and Reissue Blues Deluxe.
Fender
style PCB mount 1/4" jack.  Stereo, 9 pin. Used as the Power Amp In jack only on the original 1990s Blues Deluxe. Not used on the Blues Deluxe Reissue (2000s) or the Blues Deluxe III (2009- ).    Replaces Fender™ part numbers 0990913000, 025931, 990913, and 0025931000 and 031570.   Click here for specifications.  Replacement nut/washer set is the JN-916.

Available with or without nut/washer - choose in "Options"

Part # J-507
Starting at $2.29
Select Option:


Quantity:

 

Click on photo for
larger view

Available with or without nuts and washers.

SAVE WITH MULTIPACK!  JACK, 1/4", TIP/SLEEVE 9 PIN, PC MOUNT, Fender STYLE  1988 - Present.   PACK OF 6 JACKS.
Fender
style PCB mount 1/4" jack.  Stereo, 9 pin. Used as the Power Amp In jack only on the original 1990s Blues Deluxe. Not used on the Blues Deluxe Reissue (2000s) or the Blues Deluxe III (2009- ).    Replaces Fender™ part numbers 0990913000, 025931, 990913, and 0025931000 and 031570.   Click here for specifications.  Replacement nut/washer set is the JN-916.  Pack of 6 Jacks.

Available with or without nuts/washers - choose in "Options"

Part # J-507-6
Starting at
$10.49
(For 6 Jacks)
 
Select Option:


Number of 6-Packs:

NUT AND WASHER, NICKEL, KOBICONN OR JALCO TYPE.
Fits J-506, J-506A, J-507, J-530, J-531G, J-532, J-533, J-533G, J-539, J-539G, J-540, J-545, J-6074, J-6075, J-560.  
Part #JN-916

$0.75


Click on photo for
larger view

Note:  Nut NOT included - reuse original, or order J-510.

JACK, 1/4", MONO, REAN TYPE, PC MOUNT, Fender, others.
Fender
PCB mount 1/4" jack. Mono, 4 pin. Used as the two input jacks and the footswitch jack on the Blues Deluxe Reissue (2000s)and the Blues Deluxe III (2009-Present)  Fender™ part number 0051658000.  Nut NOT included.   Reuse existing nut or order nut separately as part #J-510. 
Part #J-509

$2.95


Click on photo for
larger view

NUT, NICKEL, REAN TYPE, Fender, AMPS 1999 - Present.
Fender
nut, fits J-508 and J-509 jacks.   (Note:  you can use this nut on the Cliff J-502, J-503, J-504, J-505, J-503L and J-504L jacks as well, if you wish to change your amps appearance.)
Part #J-510

$ 0.85


Click on photo for
larger view
JACK, 1/4", MONO, CLOSED CIRCUIT (SHORTING), WIRED, Switchcraft
Found in vintage Fender
(and other) amps as the input jack.   Also used in the Hot Rod Deluxe/Deville, Blues Deluxe/Deville as the main speaker out jack.  Includes nut and washer.    Fender™ part number 0021550000 (originally 021550).   Peavey part number 71466004.
Part #J-12A
$3.95


Click on photo for
larger view
JACK, 1/4", TIP-SLEEVE, WITH TRANSFER SWITCHING.  Switchcraft.
Used as the external speaker jack in the Fender™ Blues Deluxe.
 Original Fender™ part number 0041701000.  
Part #J-13A
$9.95


Click on photo for
larger view
SWITCH, TOGGLE - MADE BY CARLING - RATED AT 15A, 125VAC.    Two position (on/off), double pole (DPST).   Fits 1/2" chassis hole.   1/4" push on terminals.     Original Fender™ part number 003657000 (old number 036570).    Used as the power switch in the Blues Deluxe.
Part #SW-525
$8.95  


Click on photo for
larger view
SWITCH, TOGGLE - MADE BY CARLING - RATED AT 15A, 125VAC.    Two position (on/off), single pole (SPST).   Fits 1/2" chassis hole.   1/4" push on terminals.     Original Fender™ part number 003703900 (old number 037039).    Used as the standby switch in the Blues Deluxe.
Part #SW-515
$7.95  


Click on photo for
larger view
ORIGINAL Fender™ PUSH SWITCH
DPDT Mini Short-Throw Push Switch.  Has 6 electrical terminals on bottom of switch (DPDT).  Used as the Bright and Drive Select switches in the Blues Deluxe.  Original Fender™ part number 002809100.   Also Fender™ part number 028091, and 028091049.   Button not included, see K-058 below.  Has actuator shaft of 2.7mm square.
Part #SW-028
$4.95  


Click on photo for
larger view
BUTTON, for push switch, Black.  This black button pushes onto the switch stem of the Bright and Drive Select switches in the Blues Deluxe.  Original Fender™ part number 0028104000.   Button only - not the complete switch.  See the SW-028 switch above.  Fits switches with actuator shaft of 2.7mm square.

Part #K-058
$2.99  



Click on photo for
 larger view
PILOT LAMP ASSEMBLY, RED,  FENDER
Complete pilot lamp assembly:  Includes pilot lamp holder, red jewel and #47 bulb complete, fits 11/16" chassis hole.   Designed for 6.3 volts. Ready for installation and wiring in the Fender™ Blues Deluxe.
Part #FLA-124R
$6.95  



Click on photo for
 larger view
PILOT LAMP HOLDER, REPLACEMENT FOR FENDER
Pilot lamp holder, fits 11/16" Chassis Hole
Bezel inner diameter: 0.570" Bezel inner diameter (including threading): 0.527"    Works with a standard bayonet lamp such as the 6.3V #47 lamp.   Accepts all of the colored jewels on this page.

Part #LH-124
$3.95  


RED

Click on photo for
 larger view
REPLACEMENT PILOT LAMP JEWEL, Fender™, Peavey™, Mesa/Boogie™, many others.   RED - the standard on Fenders since the 1940's.   Replaces Fender™ part number 0990952000.

Part #JL-115R
$2.99  


Click on photo for
larger view
NEW! BRIGHT LED INDICATOR LAMP, REPLACES #47 BULB,
T-3-1/4, 6.3V, BAYONET BASE

Drop-in replacement long life LED replacement lamp for pilot lamps.  Fits Fender amps which are designed for the P-47 type incandescent bulb (including most Fender amps from the 1950s through the present).   The LED replacement is long lasting, runs much cooler, and is substantially brighter than the P-47 incandescent bulb.  If  less brightness is desired, install a series resistor feeding the lamp socket (1/4 or ½ watt, value between 560Ω and 1KΩ).  Sold individually.  Add new pizzazz to your amp with a brighter lamp on the front panel, and one which pays for itself in the long run with exceptionally long life.   Works on 6 volts, AC or DC.   Color is warm white.   NOTE: NOT RECOMMENDED FOR USE WITH THE PURPLE J-115P JEWEL - WILL RESULT IN A DEEP BLUE COLOR RATHER THAN PURPLE.     ALSO, NOT FOR USE WITH THE LH-110 LAMP HOLDER.
Part #LED-47
$2.95  


Click on photo for
larger view
NEW!  COOL BLUE BRIGHT OUTPUT LED INDICATOR LAMP, REPLACES #47 BULB, T-3-1/4, 6.3V, BAYONET BASE
Drop-in replacement long life BLUE OUTPUT LED replacement lamp for pilot lamps.  Fits Fender amps which are designed for the P-47 type incandescent bulb (including most Fender amps from the 1950s through the present).   (Not for use, however, with the LH-110 lamp holder). The LED replacement is long lasting, runs much cooler, and is substantially brighter than the P-47 incandescent bulb. Works on 6 volts, AC or DC. Output color is cool blue.  When used with different colored jewels, creates a different color and a different vibe!  See the results below:

Jewel Color

Resulting Look

Brightness Level

JL-115A Amber Yellow High
JL-115B Blue Medium Blue High
JL-115C Clear Crystal Blue High
JL-115G Green Light Green High
JL-115P Purple Deep Blue Medium
JL-115R Red Orange Medium
JL-115V Violet Bluish Violet Low
JL-115W White Baby Blue Low

Part #LED-47B

$2.95  


Click on photo for
larger view
INDICATOR LAMP, #47, T-3-1/4, 6.3V, .15 AMP, BAYONET BASE
P-47
General replacement lamps for dials, indicators, etc. Sold individually.  6.3V. Replaces Fender part number 0021642049
Part #P-47
$0.99  


Click on photo for
larger view
FENDER SQUARE 5mmX5mm DIFFUSED RED LED
Replaces the channel-switching indicator LED or the power indicator in several Fender amps and also in many Fender footswitches.   Replaces original Fender part number 028039.  Found in Blues Deluxe, Blues Deville, Hot Rod Deluxe, Hot Rod Deville, Deluxe 112, Deluxe 112 Plus, Ultimate Chorus, Princeton 112, Princeton 112 Plus, Powerstage 100, Roc Pro 700, BXR200, KXR60, KXR100, KXR200, Frontman 25R, Pro Reverb and Twin Amp (Pro Tube Series), Acoustasonic Jr.   Also found in the 028122 and 050419 Fender footswitches.    This LED is part of the circuitry in many Fender footswitches, and its failure often means the channel switching stops functioning correctly. This LED is red only - will not replace the bi-color footswitches used in some of these amps.

Part #LED-573
$1.75  


(Brown)

Click on photo for
larger view
Fender™ STYLE GUITAR AMP HANDLEBrown handle strap, "dogbone" style. Nickel end hooks - replacement for vintage and modern Fender™ amps.   Replacement for Fender™ part number 0990946000.   Does not contain Fender™ logo, so it may be used on other brands of amps.  Used on vintage and modern tweed, brownface and blonde tolex amps such as the Blues Deluxe.  Color of handle strap is brown.   Screws not included - order screw pack SC-402 separately (takes a pack of 4 screws).
Part #FAH-328
$7.99  


(Black)

Click on photo for
larger view
Fender™ STYLE GUITAR AMP HANDLEBlack handle strap, "dogbone" style. Nickel end hooks - replacement for vintage and modern Fender™ amps.  Replacement for Fender™ part number 0990943000.   Does not contain Fender™ logo, so it may be used on other brands of amps.  Used on vintage and modern black tolex amps such as the Blues Deluxe.   Color of handle strap is black.  Screws not included - order screw pack SC-402 separately (takes a pack of 4 screws).
Part #FAH-329
$7.99  


Click on photo for
larger view

Fender™ "DOGBONE" HANDLE SCREWS
Pack of 4 nickel "Dogbone" handle screws for Fender™ style FAH-328 and FAH-329 handles.   Fits the handle on the Fender™ Blues Deluxe.  8-32 thread.
Part #SC-402
$1.59
(for a pack of 4 screws)
 


Click on photo for
larger view

Fender™ STAINLESS STEEL BACK-PANEL SCREWS
Pack of 6 stainless steel back panel screws suitable for Fender™ reissue "Tweed" series amps. Fits the Fender™ Hot Rod Deluxe, Hot Rod Deville, Blues Deluxe, Blues Junior and Blues Deville, and 59 Bassman reissue.   3/4" long, 10-32 thread.    Fender™ Original Part number 0015990049.   Pack of 6 screws.   Made of stainless steel, for longer life and no worries about rust or oxidation. These screws are not nickel-plated.
Part #FBP-6
$2.99
(for a pack of 6 screws)


Click on photo for
larger view

Fender™ STYLE STAINLESS STEEL CHASSIS MOUNTING SCREWS
Pack of 6 stainless steel chassis mounting screws suitable for Fender™ reissue "Tweed" series amps.   Mounts the chassis to the cabinet on top as well as the sides of the cabinet.  Fits the Fender™ Hot Rod Deluxe, Hot Rod Deville, Blues Deluxe, Blues Junior, Pro Junior, and Blues Deville, 59 Bassman reissue. 1 1/2" long, 10-32 thread.    Replacement for  Fender™ Part number 0036619049.   Pack of 6 screws.   Made of stainless steel, for longer life and no worries about rust or oxidation. Note:  These screws are not nickel-plated.   For original Fender screws, see the FGCM-6 set.
Part #FCM-6
$2.99
(for a pack of 6 screws)


Click on photo for
larger view

Genuine Fender™ NICKEL-PLATED STEEL CHASSIS MOUNTING SCREWS
Pack of 6 nickel-plated steel chassis mounting screws suitable for Fender™ reissue "Tweed" series amps.   Mounts the chassis to the cabinet on top as well as the sides of the cabinet.  Fits the Fender™ Hot Rod Deluxe, Hot Rod Deville, Blues Deluxe, Blues Junior, Pro Junior, and Blues Deville, 59 Bassman reissue. 1 1/2" long, 10-32 thread.   Pack of 6 screws.   10-32 X 1-1/2 TH PHS Nickel-Plated Screws.   Genuine Fender™ Original Part number 0036619049.
Part #FGCM-6
$5.95
(for a pack of 6 screws)


Click on photo for
larger view

Fender™ STYLE ZINC-PLATED STEEL CABINET WASHERS
Pack of 6 zinc-plated steel cabinet washers suitable for Fender™ reissue "Tweed" series amps.  Used on the chassis mounting screws as well as the back-panel mounting screws.  Fits the Fender™ Hot Rod Deluxe, Hot Rod Deville, Blues Deluxe, Blues Junior, Pro Junior, and Blues Deville, 59 Bassman reissue.  Pack of 6 washers.   A replacement for Fender™ Part number 0022327049.
Part #FCW-6
$0.50
(for a pack of 6 washers)



Click on photo for
larger view
SPEAKER BAFFLE MOUNTING COPPER SCREWS AND STAINLESS STEEL KEPS NUTS (SET OF 4) FOR Fender™ TWEED AMPS.   Set of 4 screws, copper 6-32, 1 1/2 inches long, Phillips and matching 6-32 Keps Nuts with integral washers.   This set of four copper screws connects the speaker baffle board to the cabinet on Fender™ tweed combo amps from the 50s, as well as recent reissue tweed amps such as the Hot Rod Deluxe and 59 Bassman Reissue.    Replaces Fender part number 036618 or 0036618049.   For amps which require additional baffle screws, see the individual screw/nut part number SC-415, below.
Part #SC-415-4
$3.99
(for a pack of 4 screws and 4 nuts)



Click on photo for
larger view
SPEAKER BAFFLE MOUNTING COPPER SCREW AND STAINLESS STEEL KEPS NUT FOR Fender™ TWEED AMPS.  Individual screw, copper 6-32, 1 1/2 inches long, Phillips and matching 6-32 Keps Nut with integral washer.   These screws connect the speaker baffle board to the cabinet on Fender™ tweed combo amps from the 50s, as well as recent reissue tweed amps such as the Hot Rod Deluxe and 59 Bassman Reissue.    Replaces Fender part number 036618 or 0036618049.
Part #SC-415
$1.09
(for a single screw with nut)


Set of 4 screws shown.  Set of 5 screws also available.

Click on photo for
larger view

SPEAKER BAFFLE MOUNTING STAINLESS STEEL SCREWS AND STAINLESS STEEL KEPS NUTS (SETS OF 4 OR 5) FOR Fender™ BLUES DELUXE, BLUES DEVILLE, BLUES JUNIOR III, HOT ROD DELUXE OR HOT ROD DEVILLE AMPS WITH BLACK TOLEX.   Sets of either 4 or 5 screws, stainless steel 6-32, 1 1/2 inches long, flat stainless washers, Phillips and matching 6-32 Keps Nuts with integral washers.   This set of four nickel style screws connects the speaker baffle board to the cabinet on Fender™ amps.   Blues Junior III needs the 4-screw set, other larger amps with black tolex need the 5-screw set.   Replaces Fender part number 050858 or 0050858000.   For amps covered in Tweed Tolex, see the SC-415 screws.
Part #SC-414-X
4-screw set:
$2.79

5-screw set:
$3.29
Select Option:


Quantity:


Click on photo for
larger view
Fender™ style reverb or AC cable clamp.   Used on Fender amps since the early 60s to hold the reverb cable to the side of the cabinet.   Clamp is 3/8" diameter, comes with 3/4" screw for mounting.  Also used in some amplifiers to hold the AC cord to the cabinet wall.  Fender part number 022941.   Works on many other brands of amplifiers as well.
Part #
RCC-381
$0.99  


Click on photo for
larger view
LARGE SIZED STRAIN RELIEF FOR 35/64" X 5/8" HOLE
Popular strain relief found on most vintage guitar amplifiers with round power cords, including most vintage Fender™ amps.   Designed for 5/16" cord diameter.   Click here for specific dimensions of chassis hole.   For a strain relief removal / installation tool to make the job much easier, see the YTH-205 below.
Part #SR-1200
$0.99


Click on photo for
larger view
STRAIN RELIEF INSTALLATION/REMOVAL TOOL
Removing and installing a strain relief can be a frustrating job.   Standard pliers just do not get the job done and can damage the strain relief.   These special strain relief pliers are just what you need.  They fit perfectly on the AC power cord strain relief and give you the leverage you need to compress the strain relief for easy removal and installation, without damage.
Part #YTH-205
$14.95


Click on photo for
larger view
SMALL RUBBER CHASSIS GROMMET FOR 3/8 INCH CHASSIS HOLE (GROMMET INNER HOLE 1/4 INCH)
Chassis grommet, for electrical insulation, wire protection and management, shock absorption, or mechanical isolation.    This grommet has a 1/4 inch diameter inner hole, and mounts in a 3/8 inch chassis hole.   Full datasheet here.
Part #RCG-739
$0.49
each


Click on photo for
larger view
LARGE RUBBER CHASSIS GROMMET FOR 1/2" CHASSIS HOLE (GROMMET INNER HOLE 3/8 INCH)
Chassis grommet, for electrical insulation, wire protection and management, shock absorption, or mechanical isolation.    This grommet has a 3/8 inch diameter inner hole, and mounts in a 1/2 inch chassis hole.   Full datasheet here.
Part #RCG-745
$0.49
each


Click on photo for
larger view
FUSE HOLDER, ORIGINAL Fender™,  FITS MOST LATER MODEL FENDER AMPS    Fits full-size fuse. Chassis mount type with push-on tab connectors.  For standard full size 1.25" X .25" fuses. Fits through a .50" hole in the chassis. As used on the Fender '60s Super Reverb reissue and many other Fender, SWR and other amps. Brand New. Genuine Fender 0036702049. UPC 717669612139. Used on '65 Twin, Hot Rod Deluxe™, Hot Rod DeVille™, Blues Deluxe™, Blues DeVille™, Prosonic™, Vibrosonic, Pro Reverb™, Showman™ 50, '59 Bassman™, Tone Master™, Vibro-King, '63 Fender Tube Reverb and Dual Professional amplifiers Also fits '94 Twin, '65 Super Reverb™, Pro Tube Twin, '64 Vibroverb™, '57 Twin, Super-Sonic™ series, Princeton Recording Amp, Band-Master™ VM Head, Deluxe™ VM, Super Bassman and Super Champ™ XD/X2 amplifiers.
Part #FH-367
$6.49  


(Sold in packs of five fuses.  
1 1/4" long x 1/4" diameter)

FUSE,  Fender™ 3A Slow-Blow. Rated at 3A, for use with Blues Deluxe in North America (120V).

Part #MDL-3

$4.95
(Pack of 5 fuses)



Click on photo for
larger view
10 OHM, 5A NTC (Negative Temperature Coefficient) type Thermistor.   Fender part number 028503.    Used in many Fender amp models since the 1990s.  Also used in some Mesa Boogie amps.  It is installed in series in a circuit between the transformer and incoming AC power.   This thermistor is rated for 5A maximum current, and is 19mm in diameter.   By limiting inrush current, it protects the transformer and other components in the power supply at turn-on.   This thermistor should only be used on amps which have a 5 amp fuse or less.   Download data sheet here.
Part #CL-60
$3.99
(each)



Click on photo for larger view

Revisit™ Reverb Tank, 17" long, 2 spring, equivalent to Accutronics 4BB3C1B.   Input impedance 150 ohms, output impedance 2250 ohms, long decay (2.75 - 4.0 seconds), input insulated/output grounded, designed for horizontal mounting.    Replacement for Fender™ Blues Deluxe (original 90's version only).   Replaces original Fender™ part number 020489.

View the 2-year warranty details here.
Part #4BB3C1B

"Bringing back the sound of vintage Accutronics tanks"

$43.79  

 


Click on photo for larger view

Revisit™ Reverb Tank, 17" long, 2 spring, equivalent to Accutronics 4EB3C1B.   Input impedance 600 ohms, output impedance 2250 ohms, long decay (2.75 - 4.0 seconds), input insulated/output grounded, designed for horizontal mounting, open side down.    Replacement for Fender™ Blues Deluxe Reissue only.  Replaces original Fender™ part number 0050394000.

View the 2-year warranty details here.
Part #4EB3C1B

"Bringing back the sound of vintage Accutronics tanks"

$43.79
 


Click on photo for
larger view

Reverb Tank Bag for 17" tanks.   Used in a variety of amps, including Fender™ amps.  Works with any long (17") reverb tank.   Mounting screws not included.  Reverb bags give the reverb tank better isolation which results is fuller, richer reverb and less feedback.
Part #RB-017
$18.90  


Click on photo for
larger view
Fender™ Reverb Cable. Molded plastic dual RCA on one end, jacketed wires with braided shields on the other. This cable is used on the Blues Deluxe.   Fender™ part number 0041311000.  48 inches (122 cm) long. 
Part #RC-311
$5.95  


Click on photo for
larger view
TUBE SOCKET FOR MINIATURE 9-PIN TUBES.  PC MOUNT, MICALEX.    9 pin ceramic PC mount socket, stand-off mounting, 3/4" diameter, 3/4" tail diameter.  For bottom mounting (mounted from the inside of the chassis, below the chassis hole).   Fits 12AX7, 12AU7, 12AT7, 6BQ5, EL84 tubes.    Micalex replacement for the tube sockets in the Fender™ Blues Junior, Pro Junior, and the Fender™ Hot Rod Deluxe/Deville and Blues Deluxe/Deville.   Fender part number 0029167049.
Part #TS-9-620
$1.99


Click on photo for
larger view
3-PACK, TUBE SOCKET FOR MINIATURE 9-PIN TUBES.  PC MOUNT, MICALEX.    9 pin ceramic PC mount socket, stand-off mounting, 3/4" diameter, 3/4" tail diameter.  For bottom mounting (mounted from the inside of the chassis, below the chassis hole).   Fits 12AX7, 12AU7, 12AT7, 6BQ5, EL84 tubes.  Fender part number 0029167049.    This 3-pack replaces all of the sockets for the 12AX7 preamp tubes in the Fender™ Blues Junior, Hot Rod Deluxe/Deville and Blues Deluxe/Deville.
Part #TS-9-620-3
$4.99
(for a 3-pack of tube sockets)


Click on photo for
larger view
10-PACK, TUBE SOCKET FOR MINIATURE 9-PIN TUBES.  PC MOUNT, MICALEX.    9 pin ceramic PC mount socket, stand-off mounting, 3/4" diameter, 3/4" tail diameter.  For bottom mounting (mounted from the inside of the chassis, below the chassis hole).   Fits 12AX7, 12AU7, 12AT7, 6BQ5, EL84 tubes.    Fender part number 0029167049.    Used in the Fender™ Blues Junior, and the Fender™ Hot Rod Deluxe/Deville and Blues Deluxe/Deville.
Part #TS-9-620-10
$12.95
(for a 10-pack of tube sockets)


Click on photo for
larger view
TUBE SOCKET FOR MINIATURE 9-PIN TUBES.  PC MOUNT, CERAMIC.    9 pin ceramic PC mount socket, stand-off mounting, 3/4" diameter, 3/4" tail diameter.  For bottom mounting (mounted from the inside of the chassis, below the chassis hole).   Fits 12AX7, 12AU7, 12AT7, 6BQ5, EL84 tubes.    Ceramic replacement for Gibson™ Goldtone series amplifiers.  Ceramic replacement for the tube sockets in the Fender™ Blues Junior, and the Fender™ Hot Rod Deluxe/Deville and Blues Deluxe/Deville.
Part #TS-9-217
$2.19


Click on photo for larger view

CERAMIC 8-PIN PC MOUNT OUTPUT TUBE OR RECTIFIER TUBE SOCKET, crimped bracket, bottom mount 1 1/4", top mount 1" to 1 1/8", 1 1/2" mounting centers, 1" to 1 1/4" chassis hole.  Use for the 6L6 power tubes in the Fender™ Blues Deluxe.
Part #TS-8-807

$3.50


Click on photo for
larger view

Fender™ 24V DC DIP Relay 24V, 8.3mA coil, DPDT.   Used for channel switching in the Blues Deluxe.  Original Fender™ part # 0036613000. 
Part #RLY-24

$9.95

RESISTOR, FLAMEPROOF, 470 OHM, 2 WATT.    Power tube screen grid resistors in the Blues Deluxe.   Original Fender™ part number 036468001.   Available individually, or in packs of 5, below.
Part #470FP2
$0.30 each  

RESISTOR, METAL OXIDE FLAMEPROOF, 470 OHM, 2 WATT, PACK OF 5 RESISTORS.    Commonly used as the screen grid resistor in many tube amps including Fender™.  
Part #470FP2-5
$1.15
(Pack of 5 Resistors)
 

RESISTOR, SANDBLOCK 330 OHM, 5 WATT.    Common failure item in the low voltage power supply of the Fender Hot Rod Deville, Blues Deluxe, and Blues Deville.   Fender part number 028037.
Part #330W5
$0.99

RESISTOR, SANDBLOCK 470 OHM, 5 WATT.   Common failure item in the low voltage power supply of some versions of the Fender Blues Deluxe.  Fender part number 412560000 or 041256.
Part #470W5
$0.99  

16V 5W Zener 1N5353/NTE5131
(Equivalent to NTE5131).  Used in the power supply of the Fender™ Blues Deluxe.  Fender™ part number 028119.
Part #1N5353

$1.95

R3000

HIGH VOLTAGE PROTECTION DIODE - 3000V, 0.25A

Part #1N5353

$1.00


Strat™, Stratocaster™, Esquire™, Telecaster™, Tele™, Jazzmaster™, Jaguar™, Mustang™, P.Bass™, J.Bass™ and Fender™ are registered trademarks of Fender™ Musical Instruments. The replacement necks and bodies are for a Fender™ or Squier™ by Fender™ guitar or bass. The distinctive headstock designs and the distinctive body designs of the Stratocaster™, Telecaster™, J.Bass™, P.Bass™ and Tele™ Bass are registered trademarks of Fender™ Musical Instruments Co.  
Peavey™ is a registered trademark of Peavey™ Electronics Corporation.
Marshall™ is a registered trademark of Marshall™ Amplification Plc.
Mesa Boogie™ is a registered trademark of MESA/Boogie™ Ltd.
AmpRepairParts.com and Studio Sound Electronics are not affiliated with these companies.
All company names, logos and product names mentioned on these pages are trademarks of their respective owners.

Copyright ©2022 Studio Sound Electronics - All Rights Reserved
Not responsible for web site errors or omissions.
  WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov